| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 1560-3.2-1989 | 管子、阀门和接头(规定等级)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 | Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges |
| BS 1782-1951 | 消防软管接头除外的吸入软管和送水软管接头(1.5英寸至8英寸标称尺寸)规范 | Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings |
| BS 1906-1952 | (标称尺寸1/8英寸-1/4英寸）软管接头(露天和水中使用)规范 | Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes) |
| BS 2051-1-1973 | 工程用管与管接头规范.第1部分:工程用铜与铜合金毛细管与耐压管接头 | Tube and pipe fittings for engineering purposes - Copper and copper alloys capillary and compression tube fittings for engineering purposes |
| BS 2051-2-1984 | 工程用管与管接头规范.第2部分:橄榄型铜合金耐压管接头 | Tube and pipe fittings for engineering purposes - Specification for olive type copper alloy compression tube fittings |
| BS 2464-1954 | 汽油、石油和润滑剂用软管接头(标称尺寸 1/4英寸至 4英寸)规范 | Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes) |
| BS 2464-2-1969 | 石油、汽油和润滑油用软管接头规范.第2部分:高压接头 | Specification for hose couplings for petrol, oil and lubricants - High pressure couplings |
| BS 2464-3-1968 | 汽油、石油和润滑剂用软管接头规范.第3部分:快速接头 | Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings |
| BS 2464-4-1980 | 汽油、石油和润滑剂用软管接头规范.第4部分:欧洲型 100mm快速接头规范 | Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type |
| BS 2761-1983 | 球面接头规范 | Specification for spherical ground joints |
| BS 2782-11 Method 1108A-1989 | 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1108A:管界面限定碰撞率 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes |
| BS 2782-11 Method 1109A-1989 | 塑料试验方法.第11部分:热塑性塑料、接头和阀门.试验方法1109A:非承压聚乙烯管和接头耐坏境应力开裂性 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications |
| BS 2782-11 Method 1121B-1997 | 塑料的试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121B:额定外部直径和额定压力.米 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series |
| BS 2782-11 Method 1121C-1997 | 塑料试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121C:额定外部直径和额定压力.英尺 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series |
| BS 2782-11 Method 1121H-1996 | 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1121H:非承压液体输送热塑性塑料管.管头损失计算 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses |
| BS 2C 4-1973 | 飞机发动机制冷剂压力灌注接头尺寸规范 | Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections |
| BS 2C 5-1976 | 液氧灌注连接头配合尺寸规范 | Specification for mating dimensions for liquid oxygen replenishment couplings |
| BS 2M 53-1997 | 飞机.液压系统.管道和管接头热冲击试验 | Aircraft - Fluid systems - Thermal shock testing of piping and fittings |
| BS 2SP 101-104-1956 | 飞行器用旋转套筒、张力传动杆和旋压钢索端部接头(统一螺纹)规范 | Specifications for turnbarrels, tension rods and swaged cable-end connections (Unified threads) for aircraft |
| BS 2SP 7-1943 | 飞机材料规范.叉形接头(高强度型)(尺寸号 4B.A.至<1/4>英寸B.S.F | Specification for aircraft material - Fork joints (high tensile type) (for sizes No. 4 B.A. to 3/4 inch B.S.F. inclusive) |
| BS 31-1940 | 电气布线用钢导线管和管接头 | Specification - Steel conduit and fittings for electrical wiring |
| BS 3288-3-1989 | 架空电力导线绝缘和导线接头.第3部分:绝缘子组件球窝连接接头尺寸 | Insulator and conductor fittings for overhead power lines - Dimensions of ball and socket couplings of string insulator units |
| BS 336-1989 | 消防软管接头与辅助设备的规范 | Specification for fire hose couplings and ancillary equipment |
| BS 341-3-2002 | 可运输气体容器的阀门.阀门出口接头 | Transportable gas container valves - Valve outlet connections |
| BS 3799-1974 | 石油工业用钢管配件、螺旋管接头和套管焊接规范 | Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry |
| BS 3818-1964 | 柴油机车及有轨内燃机车自动密封加油接头规范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 3SP 3-1943 | 飞机材料规范.叉形接头(低强度型)(尺寸自N0.4B.A至<1/2>英寸B.S.F.) | Specification for aircraft material - Fork joints (low tensile type) (for sizes No. 4 B.A. to 1/2 inch B.S.F. inclusive) |
| BS 4222-1967 | 牙科手持机的传动联轴器(滑配接头)尺寸规范 | Specification for dimensions of the transmission coupling (slip-joint) to dental handpieces |
| BS 4368-4-1984 | 液压和通用压合管接头.第4部分:型号试验要求规范 | Metallic tube connectors for fluid power and general use - Specification for type test requirements |
| BS 4568-1-1970 | 电气装置用ISO型米制螺纹钢导管及接头规范.第1部分:钢导管、弯头和接头 | Specification for steel conduit and fittings with metric threads of ISO form for electrical installations - Steel conduit, bends and couplers |
| BS 4579-2-1973 | 电缆和电线连接器机械和压合接头性能规范.第2部分:镍、铁及镀铜导线压合接头 | Specification for performance of mechanical and compression joints in electric cable and wire connectors - Compression joints in nickel, iron and plated copper conductors |
| BS 4607-1-1984 | 电气装置用非金属导管及接头规范.第1部分:绝缘材料接头和元件规范 | Non-metallic conduits and fittings for electrical installations - Specification for fittings and components of insulating material |
| BS 4607-5-1982 | 电气装置用非金属导管及接头规范.第5部分:绝缘材料刚性导管、接头和元件规范 | Non-metallic conduits and fittings for electrical installations - Specification for rigid conduits, fittings and components of insulating material |
| BS 4622-1970 | 灰口铁管和管接头规范 | Specification for grey iron pipes and fittings |
| BS 4742-4-1985 | 农用机械液压设备.第4部分:挂车和机具用制动系统用液压管接头规范 | Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment |
| BS 4742-7-1989 | 农用机械液压设备.第7部分:农用拖挂车辆液压制动系统管接头用油口连接规范 | Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings |
| BS 4871-3-1985 | 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头间电弧焊 | Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials |
| BS 4G 178-2-1986 | 飞机电缆电线压接头.第2部分:压接检验规范(包括用户检验试验) | Crimped joints for aircraft electrical cables and wires - Specification for control of crimping (including user control tests) |
| BS 5200-1997 | 水管接头和转接器的尺寸规范 | Specification for dimensions of hydraulic connectors and adaptors |
| BS 534-1990 | 水和污水用钢管接头和异型管件规范 | Specification for steel pipes, joints and specials for water and sewage |
| BS 5529-1988 | 工业用低压开关设备和控制装置规范.A型、直流用、3或4个接头的近距离电感开关 | Specification for low-voltage switchgear and controlgear for industrial use - Inductive proximity switches - Form A, for direct current, 3 or 4 terminals |
| BS 5611-1978 | 负载分接头切换开关应用指南 | Application guide for on-load tap-changers |
| BS 5649-5-1982 | 路灯杆规范.第5部分:电气接头底座与电线敷设槽规范 | Lighting columns - Specification for base compartments and cableways |
| BS 572-1985 | 互换式锥形毛玻璃接头规范 | Specification for interchangeable conical ground glass joints |
| BS 5911-1-2002 | 预制混凝土管、管配件和辅助制品.具有软接头的非加筋、加筋混凝土管(包括套管)和管配件规范(对 BS EN 1916: | Concrete pipes and ancillary concrete products - Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints(comnplementary to BSEN 1916:2002) |
| BS 5911-5-2004 | 混凝土管和辅助混凝土制品.带软接头的预应力非压力管道和配件的规范 | Concrete pipes and ancillary concrete products - Specification for prestressed non-pressure pipes and fittings with flexible joints |
| BS 6083-5-1984 | 助听器.第5部分:内插式耳机短接管接头和封闭装置尺寸规范 | Hearing aids - Specification for dimensions of the nipple and sealing device for insert earphones |
| BS 6102-15-1991 | 自行车.第15部分:辐条螺纹接头尺寸规范 | Cycles - Specification for dimensions of spoke nipples |
| BS 6362-1990 | 按BS21 "带压密接合螺纹接头的管及配件管螺纹" 攻丝的不锈钢管规范 | Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads' |
| BS 6464-1984 | 制炼厂用增强塑料管、配件和接头规范 | Specification for reinforced plastics pipes, fittings and joints for process plants |
| BS 65-1991 | 只用于地表水管道和配件的陶管、配件、导管和挠性机械接头规范 | Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings |
| BS 6537-1984 | 液压流体设备用U型接头规范 | Specification for staple type connectors for hydraulic fluid power applications |
| BS 669-1-1989 | 燃气灶具用软管、管接头和承窩接口.第1部分:采用第1、2类燃气的家用灶具用带绕金属软管、护罩、接头配件和 | Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
| BS 669-2-1997 | 燃气灶具用软管、接头和管座.使用第1、2和3类燃气的家用灶具波纹金属软管、封盖、接头和管座规范 | Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases |
| BS 6910-2-1989 | 电压范围为交流1000V和直流1500Vd.c.的低温浇注树脂复合物和热缩电缆接头.第2部分:现场安装实用规程 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 746-2005+A1-2009 | 燃气表活接头与转接器用规范 | Specification for gas meter unions and adaptors |
| BS 7677-1993 | 管道接头用密封圈缺陷分类推荐标准 | Recommendations for classification of imperfections in pipe joint rings |
| BS 778-1966 | 液压用钢管与接头规范 | Specification for steel pipes and joints for hydraulic purposes |
| BS 8407-2002 | 地下用输送带机械和叠接接头的规范 | Specification for mechanical and spliced joints in conveyor belting for use underground |
| BS 864-2-1983 | 铜和铜合金制毛细管与承压管配件.铜管用毛细管与压合接头规范 | Capillary and compression tube fittings of copper and copper alloy. Specification for capillary and compression fittings for copper tubes |
| BS 9522 N0001-1982 | 直流和低频用多触头圆形电气连接件详细规范、带有前面可释放后面可拆卸的压接触点卡口接头.全面评估级 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling with front release, rear removable crimp contacts - Full assessment level |
| BS 9522 N0003-1990 | 直流和低频用多触点圆形电气连接器详细规范.带后可插入、后释放、后可拆卸压接触点的无档板密封、耐环境影 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications - Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles - Full plus airframe fit assessment |
| BS A 358-3-2000 | MJ螺纹.流体系统用的接头的极限尺寸 | MJ threads - Limit dimensions for fittings for fluid systems |
| BS AU 91-1965 | 起动蓄电池圆锥形接线端子的电缆接头尺寸(用正极接地部件的汽车和轻便商用汽车)规范 | Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) |
| BS DD CEN/TS 1591-3-2007 | 法兰及其连接件.垫圈的圆形法兰连接件用设计原则.第3部分:金属与金属接点之间的法兰接头的计算方法 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint |
| BS DD CEN/TS 1591-4-2007 | 法兰及其连接件.垫圈的圆形法兰连接件用设计原则.第4部分:服从压力设备指令、符合设备螺栓接头装配要求的人 | Flanges and their joints — Design rules for gasketed circular flange connections — Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive |
| BS EN 10253-1-1999 | 对接焊管道接头.通用和无特殊检验要求的锻制碳钢 | Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements |
| BS EN 10253-2-2007 | 对接焊管道接头.带特殊检验要求的非合金和铁素体合金钢 | Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| BS EN 10253-3-2008 | 对焊管接头.无特殊检验要求的锻制奥氏体和奥氏体-铁素体(二相)不锈钢 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| BS EN 10253-4-2008 | 对焊管道接头.具有特殊检验要求的锻制奥氏体和铁素体－奥氏体(二相)不锈钢 | Butt-welding pipe fittings - Part 4:Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| BS EN 10311-2005 | 水和其他含水液体传送用钢管和配件的连接用接头 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| BS EN 1075-2000 | 木结构.试验方法.由冲打孔金属板紧固件构成的接头 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
| BS EN 1092-2-1997 | 法兰及其连接.按PN标注的管、阀门、管接头和附件的圆形安装法兰.第2部分:铸铁法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges |
| BS EN 12308-1998 | 液化天然气设施和设备.用于液化天然气管道的法兰接头垫圈设计适配性试验 | Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
| BS EN 12316-1-2000 | 防水柔性板.接头抗剥离性的测定.屋顶防水沥青板 | Flexible sheets for waterproofing - Determination of peel resistance of joints - Bitumen sheets for roof waterproofing |
| BS EN 12316-2-2000 | 防水柔性板.接头抗剥离性的测定.屋顶防水用塑料和橡胶薄板 | Flexible sheets for waterproofing - Determination of peel resistance of joints - Plastic and rubber sheets for roof waterproofing |
| BS EN 12317-1-2000 | 防水柔性板.屋顶防水沥青板.接头抗剪切性的测定 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
| BS EN 12512-2001 | 木结构.试验方法.机械紧固件接头的周期测试 | Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
| BS EN 12517-2-2008 | 焊缝的无损检验.通过射线照相术评估铝及铝合金的焊接接头.验收等级 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels |
| BS EN 1254-1-1998 | 铜和铜合金.管路接头.铜管毛细管钎焊法或铜焊法用端头接头 | Copper and copper alloys - Plumbing fittings - Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 1254-2-1998 | 铜和铜合金.管路接头.与铜管一起使用的压合接头 | Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with copper tubes |
| BS EN 1254-3-1998 | 铜和铜合金.管路接头.与塑料管一起使用的压合接头 | Copper and copper alloys - Plumbing fittings - Fittings with compression ends for use with plastics pipes |
| BS EN 1254-4-1998 | 铜和铜合金.管路接头.与带有毛细管或压力端头的其它端头连接的管接头 | Copper and copper alloys - Plumbing fittings - Fittings combining other end connections with capillary or compression ends |
| BS EN 1254-5-1998 | 铜和铜合金.管路接头.铜管毛细管铜焊法用短端头接头 | Copper and copper alloys - Plumbing fittings - Fittings with short ends for capillary brazing to copper tubes |
| BS EN 12560-1-2001 | 法兰及其接头.标示等级的法兰衬垫.有或无插孔的非金属水平衬垫 | Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic flat gaskets with or without inserts |
| BS EN 12560-2-2001 | 法兰及其接头.标示等级的法兰衬垫.钢法兰用螺旋缠绕衬垫 | Flanges and their joints - Gaskets for Class-designated flanges - Spiral wound gaskets for use with steel flanges |
| BS EN 12560-3-2001 | 法兰及其接头.标示等级的法兰衬垫.非金属PTFE外壳衬垫 | Flanges and their joints - Gaskets for Class-designated flanges - Non-metallic PTFE envelope gaskets |
| BS EN 12560-4-2001 | 法兰及其接头.标示等级的法兰的衬垫.钢法兰用波纹状、水平或皱缩金属和填充金属衬垫 | Flanges and their joints - Gaskets for Class-designated flanges - Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
| BS EN 12560-5-2001 | 法兰及其接头.标示等级的法兰的衬垫.钢法兰用金属环接头衬垫 | Flanges and their joints - Gaskets for Class-designated flanges - Metallic ring joint gaskets for use with steel flanges |
| BS EN 12560-7-2004 | 法兰及其接头.分级标示法兰用垫圈.钢法兰用涂覆金属的套层垫圈 | Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges |
| BS EN 12573-4-2000 | 焊接非静压热塑罐.法兰接头的设计和计算 | Welded static non-pressurized thermoplastic tanks - Design and calculation of flanged joints |
| BS EN 1277-2004 | 塑料管道系统.地下无压用热塑性管道系统.弹性密封环型接头密封性的试验方法 | Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
| BS EN 12797-2000 | 铜焊.铜焊接头破坏试验 | Brazing - Destructive tests of brazed joints |
| BS EN 12799-2000 | 铜焊.铜焊接头无损检验 | Brazing - Non-destructive examination of brazed joints |
| BS EN 12814-1-2000 | 热塑性半成品焊接接头试验.弯曲试验 | Testing of welded joints of thermoplastics semi-finished products - Bend test |
| BS EN 12814-2-2000 | 热塑半成品焊接接头试验.拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Tensile test |
| BS EN 12814-3-2000 | 热塑半成品焊接接头试验.拉伸蠕变试验 | Testing of welded joints of thermoplastics semi-finished products - Tensile creep test |
| BS EN 12814-4-2001 | 热塑半成品焊接接头试验.剥离试验 | Testing of welded joints of thermoplastics semi-finished products - Peel test |
| BS EN 12814-5-2000 | 热塑半成品焊接接头试验.宏观检查 | Testing of welded joints of thermoplastics semi-finished products - Macroscopic examination |
| BS EN 12814-6-2000 | 热塑半成品焊接接头试验.低温拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test |
| BS EN 12814-7-2002 | 热塑性半成品的焊接接头的试验.腰形试验样品的拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Tensile test with waisted test specimens |
| BS EN 12814-8-2001 | 热塑半成品焊接接头试验.要求 | Testing of welded joints of thermoplastic semi-finished products -. Requirements |
| BS EN 13090-2000 | 建筑物内气体管道的螺纹接头重新密封方法 | Means for resealing threaded joints of gas pipework in buildings |
| BS EN 13100-1-2000 | 热塑性半成品焊接接头无损检验.目视检查 | Non destructive testing of welded joints of thermoplastics semi-finished products - Visual examination |
| BS EN 13100-2-2004 | 热塑性半成品焊接接头的无损检验.X射线照相检验 | Non destrictive testing of welded joints of thermoplastics semi-finished products - X-ray radiographic testing |
| BS EN 13100-3-2004 | 热塑性半成品焊接接头的无损检验.超声检验 | Non-destructive testing of welded joints in thermoplastics semi-finished products - Ultrasonic testing |
| BS EN 13271-2002 | 木材紧固件.连接器接头的特征载荷能力和滑脱系数 | Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints |
| BS EN 14257-2006 | 粘合剂.木材粘合剂.温度升高时搭接接头拉伸强度的测定(WATT '91) | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
| BS EN 14258-2004 | 结构粘合剂.短期或长期暴露于特定温度条件下的粘合接头的机械性能 | Structural adhesives - Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| BS EN 1435-1997 | 焊缝的无损检验.焊接接头的放射性检验 | Non-destructive examination of welds - Radiographic examination of welded joints |
| BS EN 144-3-2003 | 呼吸保护装置.气瓶阀.潜水用Nitrox和氧气气瓶的出口接头 | Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen |
| BS EN 14454-2005 | 防饮用水回流污染的装置.软管接头防回流装置DN 15～DN 32.A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A |
| BS EN 14525-2005 | 不同材料管道用球墨铸铁大公差联接器和法兰接头:球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 14741-2006 | 热塑管和管道系统.非压力掩埋用接头.通过评估密封压力测定弹性密封件接合处的长期密封性能的试验方法 | Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
| BS EN 15096-2008 | 防饮用水回流污染用装置.软管接头防真空阀.包括B型和D型H系列的DN 15～DN 25.通用技术规范 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D. General technical specification |
| BS EN 1515-1-2000 | 法兰及其接头.螺栓连接.螺栓连接的选择 | Flanges and their joints - Bolting - Selection of bolting |
| BS EN 15617-2009 | 焊接接头的无损检验.飞行时间衍射技术(TOFD).接受等级 | Non-destructive testing of welds - Time-of-flight diffraction technique (TOFD) - Acceptance levels |
| BS EN 1591-2-2008 | 法兰及其接头.带衬垫的环形法兰连接件的设计规则.垫圈参数 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 2:Gasket parameters |
| BS EN 1741-1998 | 带有开放结构的蒸气加气混凝土或轻集料混凝土预制构件之间接头处非平面方向抗剪切强度的测定 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| BS EN 175201-804-2000 | 电子元器件质量评定协调系统.详细规范.环形连接器.螺纹接头直径1.6mm圆触点 | Harmonized system of quality assessment for electronic components - Detail specification - Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| BS EN 1829-2-2008 | 高压喷水机器.安全要求.软管、软管管路和接头 | High-pressure water jet machines — Safety requirements — Part 2: Hoses, hose lines and connectors |
| BS EN 1993-1-8-2005 | 欧洲法规3.钢结构的设计.接头设计 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| BS EN 205-2003 | 胶粘剂.非结构用木材粘结剂.搭接接头拉力剪切强度的测量 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| BS EN 21089-1992 | 点焊设备用电极锥度接头.尺寸 | Electrode taper fits for spot welding equipment - Dimensions |
| BS EN 2591-217-2002 | 电气和光学连接元件.试验方法.终端接线片和连机拼合接头在规定电流下的电压降 | Elements of electrical and optical connection - Test methods - Voltage drop under specified current for terminal lugs and in-line splices |
| BS EN 2591-218-2002 | 电气和光学连接元件.试验方法.用温度和电流循环法试验终端接线片和连机拼合接头的衰老程度 | Elements of electrical and optical connection - Test methods - Ageing of terminal lugs and in-line splices by temperature and current cycling |
| BS EN 2591-219-2002 | 电器和光学连接元件.试验方法.绝缘终端接线片和连机拼合接头的电压强度 | Elements of electrical and optical connection - Test methods - Voltage strength for insulated terminal lugs and in-line splices |
| BS EN 2591-220-2005 | 航空航天系列.电和光学连接元件.试验方法.电流和温度周期性变化引起的触点/导体接头老化 | Elements of electrical and optical connection — Test methods — Part 220: Contact/conductor joint ageing by current and temperature cycling |
| BS EN 2665-003-1999 | 额定电流为20A至50A的温度补偿的三极电路断路器.米制螺纹接头.产品标准 | Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard |
| BS EN 2665-004-1999 | 额定电流为20A至50A的温度补偿的三极电路断路器.UNC螺纹接头.产品标准 | Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard |
| BS EN 26891-1991 | 木结构.机械紧固件接头.强度和变形特性测定一般原则 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics |
| BS EN 2794-003-1999 | 额定电流为20A至50A的温度补偿的单极电路断路器.米制螺纹接头.产品标准 | Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. Metric thread terminals - Product standard |
| BS EN 2794-004-1999 | 额定电流为20A至50A的温度补偿的单极电路断路器.UNC螺纹接头.产品标准 | Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals - Product standard |
| BS EN 28430-1-1992 | 点焊设备规程.电极夹具.第1部分:锥形接头锥度1:10 | Specification for resistance spot welding - Electrode holders - Taper fixing 1:10 |
| BS EN 28430-2-1992 | 点焊设备规程.电极夹具.第2部分:莫氏锥形接头 | Specification for resistance spot welding - Electrode holders - Morse taper fixing |
| BS EN 28970-1991 | 木结构.用机械紧固件连接的接头试验.木材致密度要求 | Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density |
| BS EN 295-1-1991 | 排水管和下水道用陶管和管配件及管接头.要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements |
| BS EN 295-2-1991 | 排水管和下水道用陶管和管配件及管接头.质量控制和抽样 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Quality control and sampling |
| BS EN 295-3-1991 | 排水管和下水道用陶管和管配件及管接头.试验方法 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Test methods |
| BS EN 295-4-1995 | 排水管和下水道用陶制管和管配件及管接头.专用配件、管接头和配套附件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for special fittings, adaptors and compatible accessories |
| BS EN 295-5-1994 | 排水管和下水道用陶管和管配件及管接头.带孔的陶管及配件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for perforated vitrified clay pipes and fittings |
| BS EN 295-6-1996 | 排水管和污水管用陶制管、管件及管接头.陶制管人孔的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay manholes |
| BS EN 295-7-1996 | 排水管和污水管用陶制管、管件及管接头.陶制管和管插接接头的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Requirements for vitrified clay pipes and joints for pipe jacking |
| BS EN 3079-2006 | 8°30'压力＜28000kPa的导管接头.适配器.米制系列.技术规范 | Pipe coupling 8 °30' up to 28000 kPa - Adaptors - Metric series - Technical specification |
| BS EN 3082-2001 | 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded, for repair |
| BS EN 3083-2001 | 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded end, for repair |
| BS EN 3084-2001 | 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded end threaded for repair |
| BS EN 3244-2001 | 航空航天系列.钛合金8°30’管连接件.双端头的活接头 | Aerospace Series - Pipe coupling 8 °30' in titanium alloy - Unions, double ended |
| BS EN 3245-2001 | 航空航天系列.钛合金8°30'管连接件.变径活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, reducer |
| BS EN 3246-2001 | 航空航天系列.钛合金8°30' 管连接件.、闷头活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead |
| BS EN 3247-2001 | 航空航天系列.钛合金8°30'管连接件.闷头焊接端活接头、 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead welded end |
| BS EN 3248-2001 | 航空航天系列.钛合金管连接件8°30’.带锁紧装置的缩径管端的转接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptors, reduced pipe end, with lockring |
| BS EN 3373-001-2007 | 航空航天系列.电导体压接用终端盒和内嵌式接头.第001部分:技术规范 | Aerospace series — Terminal lugs and in-line splices for crimping on electric conductors — Part 001: Technical specification |
| BS EN 3373-010-2009 | 航空航天系列.电导体压接用终端盒和内嵌式接头.米制和英制螺栓系列用温度低于150℃铜导体压接用镀锡环型终 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard |
| BS EN 3373-011-2009 | 航空航天系列.电导体压接用终端盒和内嵌式接头.米制和英制螺柱系列用温度小于260℃、铜导体压接用镀镍环形 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard |
| BS EN 3373-012-2005 | 电导体压接用终端盒和内嵌式接头.第012部分:温度小于150℃铜导体压接用绝缘和密封的内嵌式接头.产品标准 | Terminal lugs and in-line splices for crimping on electric conductors - Part 012: In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150 ℃ - Product standard |
| BS EN 3373-013-2005 | 电导体压接用终端盒和内嵌式接头.第013部分:温度小于260℃铜导体压接用绝缘和防潮的内嵌式接头.产品标准 | Terminal lugs and in-line splices for crimping on electric conductors - Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 ℃ - Product standard |
| BS EN 3566-2001 | 航空航天系列.钛合金8°30'管连接件.带锁紧装置的转接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Adaptor with lockring |
| BS EN 3690-2001 | 航空航天系列.钛合金8°30'管联接件.长闷头活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long |
| BS EN 3691-2001 | 航空航天系列.钛合金8°30'管连接件.长焊接的闷头活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, bulkhead, long welded |
| BS EN 3773-003-1999 | 最大转换容量为65 In/1000 A，额定电流为1A至25A的温度补偿的单极电路断路器.米制螺纹接头.产品标准 | Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - Metric thread terminals - Product standard |
| BS EN 3773-004-1999 | 最大转换容量为65 In/1000 A，额定电流为1A至25A的温度补偿的单极电路断路器.UNC螺纹接头.产品标准 | Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A, switching capacity 65 In/1000 A max - UNC thread terminals - Product standard |
| BS EN 3774-003-1999 | 转换容量为65 In，额定电流为2A至25A的温度补偿的三级电路断路器.米制螺纹接头.产品标准 | Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In - Metric thread terminals - Product standard |
| BS EN 3774-004-1999 | 转换容量为65 In，额定电流为2A至25A的温度补偿的三级电路断路器.UNC螺纹接头.产品标准 | Circuit breakers, three-pole, temperature compensated, rated currents 2A to 25A, switching capacity 65 In - UNC thread terminals - Product standard |
| BS EN 3852-2002 | 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直螺纹式焊接接头 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| BS EN 3853-2002 | 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.直活螺纹接头 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, threaded |
| BS EN 387-2002 | 胶合层压板.大指形接头.性能要求和最低生产要求 | Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements |
| BS EN 4031-2001 | 航空航天系列.钛合金管连接件8°30'.焊接活接头用螺母 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Nut for welded union |
| BS EN 4051-2002 | 航空航天系列.TI-P64001型钛合金制、球形、60度管连接器.油口接头 | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy - Port connection |
| BS EN 4186-2001 | 航空航天系列.钛合金管连接件8°30'.十字形活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, cross |
| BS EN 4233-2001 | 航空航天系列.钛合金管连接件8°30'.带螺纹的焊接活接头 | Aerospace series - Pipe coupling 8 °30' in titanium alloy - Unions, welded, threaded |
| BS EN 4552-2003 | 航空航天系列.耐热钢制球面37 管联接器.端部焊接的直管接头.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Straight nipples, welded end - Inch series |
| BS EN 4553-2003 | 航空航天系列.耐热钢制球面37 管联接器.端部焊接的90 弯头管接头.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Elbow 90 ° nipples, welded end - Inch series |
| BS EN 4557-2003 | 航空航天系列.耐热钢制球面37 管联接器.端部焊接的T形管接头.英制 | Aerospace series - Pipe coupling 37 °, spherical, in heat resisting steel - Tees nipples, welded end - Inch series |
| BS EN 4610-2005 | 航空航天系列.8°30'钛合金管接头.带推进线螺母的45°弯头 | Pipe coupling 8°30' in titanium alloy — Elbows 45°, with thrust wire nut |
| BS EN 50377-2-1-2001 | 光纤通信系统使用的接头组件和互连元件.产品规范.接线端设在IEC 60793-2类B1单模纤维上的FC-PC型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre |
| BS EN 512-1995 | 纤维水泥制品.压力管道和接头 | Fibre-cement products - Pressure pipes and joints |
| BS EN 514-2000 | 制作门窗用未增塑聚氯乙烯(PVC-U)型材.胶结角和T接头的强度测定 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints |
| BS EN 61284-1998 | 架空线.接头要求和试验 | Overhead lines - Requirements and tests for fittings |
| BS EN 61300-2-33-2007 | 纤维光学互联装置和无源部件.基本试验和测量程序.试验.光缆接头盒组装和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of fibre optic closures |
| BS EN 61466-1-1997 | 标称电压超过1000V的架空线用复合绝缘子串组合件.标准强度等级和接头配件 | Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V. Standard strength classes and end fittings |
| BS EN 639-1995 | 包括接头和配件的混凝土压力管的共同要求 | Common requirements for concrete pressure pipes including joints and fittings |
| BS EN 640-1995 | 钢筋混凝土压力管和分布钢筋混凝土压力管（非圆柱型），包括接头和配件 | Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings |
| BS EN 641-1995 | 包括接头和配件的圆柱型加筋混凝土压力管 | Reinforced concrete pressure pipes, cylinder type, including joints and fittings |
| BS EN 642-1995 | 包括接头、配件和管道预应力钢特殊要求的圆柱型和非圆柱型预应力混凝土压力管 | Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes |
| BS EN 715-1995 | 热塑管道系统.小直径压力管和配件间端部负荷轴承接头.在包含端推力的内部水压下密封性的试验方法 | Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust |
| BS EN 751-1-1997 | 与第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.厌氧密封剂 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Anaerobic jointing compounds |
| BS EN 751-2-1997 | 与第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.非硬化密封剂 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Non-hardening jointing compounds |
| BS EN 751-3-1997 | 第1,2,3类家庭用燃气和热水装置连接的金属螺纹接头的密封材料.非烧结PTFE密封带. | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Unsintered PTFE tapes |
| BS EN 804-1995 | 塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法 | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| BS EN 846-3-2000 | 圬工辅助砌块的试验方法.预制基地加固处接头的剪切负载容量的测定 | Methods of test for ancillary components for masonry - Determination of shear load capacity of welds in prefabricated bed joint reinforcement |
| BS EN 877-1999+A1-2006 | 建筑物中水排放用生铁管和配件及其接头和配件.要求、试验方法和质量保证 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings — Requirements, test methods and quality assurance |
| BS EN 911-1996 | 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部流体静压条件下防漏密封试验方法 | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
| BS EN ISO 10042-2006 | 焊接.铝和铝合金弧焊接头.缺陷质量分级 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| BS EN ISO 10692-2-2001 | 气瓶.用于微电子工业的储气瓶阀的连接接头.接到钢瓶连接接头上的阀门的定型试验和规范 | Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Specification and type testing for valve to cylinder connections |
| BS EN ISO 11144-1997 | 牙科设备.漱口冲洗牙用给排水管接头 | Dental equipment - Connections for supply and waste lines |
| BS EN ISO 13844-2000 | 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下的密封性试验方法 | Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure |
| BS EN ISO 13845-2000 | 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验 | Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection |
| BS EN ISO 13846-2001 | 塑料管道系统.热塑性压力管用端负载和无端负载支承组件和接头.内部水压下长期密封性的试验方法 | Plastics piping systems - End-load-bearing and non-end-load bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure |
| BS EN ISO 13919-1-1997 | 焊接.电子和激光束焊接接头.缺陷的质量级别导则.钢 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel |
| BS EN ISO 13919-2-2001 | 焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys |
| BS EN ISO 14324-2003 | 电阻点焊.焊接有损试验.点焊接头的疲劳试验方法 | Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints |
| BS EN ISO 15236-4-2004 | 钢丝绳运输带.硫化的带接头 | Steel cord conveyor belts - Vulcanized belt joints |
| BS EN ISO 15245-1-2001 | 气瓶.连接储气瓶阀门接头用平行螺纹.规范 | Gas cylinders - Parallel threads for connection of valves to gas cylinders - Specification |
| BS EN ISO 16070-2006 | 石油和天然气工业.下降孔设备.锁紧芯轴和落地螺纹接头 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples |
| BS EN ISO 17659-2004 | 焊接.带图解的焊接接头的多语种术语 | Welding - Multilingual terms for welded joints with illustrations |
| BS EN ISO 22825-2006 | 接头的无损检验.超声波试验.奥氏体钢和镍基合金接头的试验 | Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys |
| BS EN ISO 4797-2005 | 实验室玻璃器皿.锥形磨口接头烧瓶 | Laboratory glassware - Boiling flasks with conical ground joints |
| BS EN ISO 5356-1-2004 | 麻醉和呼吸设备.圆锥形接头.锥体和锥套 | Anaesthetic and respiratory equipment - Conical connectors - Cones and sockets |
| BS EN ISO 5620-1-1997 | 造船和海上建筑物.饮用水箱注水接头.总要求 | Shipbuilding and marine structures - Filling connection for drinking water tanks - General requirements |
| BS EN ISO 5620-2-1997 | 造船和海上建筑物.饮用水箱注水接头.部件 | Shipbuilding and marine structures - Filling connection for drinking water tanks - Components |
| BS EN ISO 5817-2007 | 焊接.钢、镍、钛和其合金的熔焊接头(束焊除外).缺陷的质量等级 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
| BS EN ISO 5828-2001 | 电阻焊设备.连接水冷接头的二次接线电缆.尺寸和特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
| BS EN ISO 6149-1-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的端口和螺纹端头.O形密封用平切壳体端口 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Ports with truncated housing for O-ring seal |
| BS EN ISO 6149-2-2007 | 液压流体传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的油口和螺纹端头.重型(S系列)螺柱端头的尺 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for heavy-duty (S series) stud ends |
| BS EN ISO 6149-3-2007 | 液压流体传动和一般用途的管接头.带ISO 261米制螺纹和O形密封圈的油口和螺纹端头.轻型(L系列)螺柱端头的尺 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions , design, test methods and requirements for light-duty (L series) stud ends |
| BS EN ISO 8092-1-1998 | 道路车辆.车上电气布线线束的连接.单极连接接头用接线片.尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements |
| BS EN ISO 8434-4-2000 | 液压及通用金属管连接件.有O形面焊接管接头的24度锥形连接件 | Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples |
| BS EN ISO 9692-2-1998 | 焊接和相关工艺.接头的预处理.钢的埋弧焊 | Welding and allied processes - Joint preparation - Submerged arc welding of steels |
| BS EN ISO 9692-3-2001 | 焊接和相关工艺.接头的准备.铝及其合金的金属极惰性气体保护焊和钨极惰性气体保护焊 | Welding and allied processes - Joint preparation - Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| BS EN ISO 9692-4-2003 | 焊接和相关工艺.接头制备.包钢 | Welding and allied processes - Joint preparation - Clad steels |
| BS ISO 10955-1999 | 飞行器操纵钢丝绳用末端接头和松紧套筒.技术规范 | End-fittings and turnbarrels for aircraft control wire rope - Technical specification |
| BS ISO 12151-2-2003 | 液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings |
| BS ISO 12151-4-2007 | 用于液压流体传动和一般用途的接头.软管配件.带ISO 6149米制螺柱端头的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6149 metric stud ends |
| BS ISO 12151-5-2007 | 用于液压流体传动和一般用途的接头.软管组件.带ISO 8434-2 37°扩口端的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends |
| BS ISO 13486-1-1999 | 道路车辆.液压制动系统.双扩口管,螺纹孔,外螺纹接头和管座 | Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats |
| BS ISO 13950-2007 | 塑料管和管件.电熔合接头用自动识别系统 | Plastics pipes and fittings - Automatic recognition systems for electrofusion joints |
| BS ISO 13953-2001 | 聚乙烯管道和配件.根据对焊接头对试样的抗拉强度和断裂模式的测定 | Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| BS ISO 15509-2001 | 粘合剂.工程塑料接头粘合强度测定 | Adhesives - Determination of the bond strength of engineering-plastic joints |
| BS ISO 16422-2006 | 压力送水用定向未增塑聚(氯)乙烯(PVC-O)制作的管道和接头.规范 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications |
| BS ISO 22826-2006 | 金属材料焊缝的破坏性试验.激光和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验) | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| BS ISO 24497-3-2007 | 无损检验.金属磁存储器.焊接接头的检验 | Non-destructive testing - Metal magnetic memory - Inspection of welded joints |
| BS ISO 2974-2005 | 柴油机.60°锥孔的高压油管接头管端部连接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 ° female cone |
| BS ISO 5675-2008 | 农业拖拉机和机械.通用快动液压接头 | Agricultural tractors and machinery - General purpose quick-action hydraulic couplers |
| BS ISO 6149-4-2006 | 用于流体传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的油口和螺纹端头.内外六角端口栓塞的尺寸、 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Dimensions, design, test methods and requirements for external and internal hex port plugs |
| BS ISO 6162-1-2002 | 液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为3,5MPa(35bar)至35MPa(350bar),DN1 | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| BS ISO 6162-2-2002 | 液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为35MPa(350bar)至40MPa(400bar),DN1 | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 |
| BS ISO 6489-2-2002 | 农用车辆.被牵引和牵引车辆间的机械连接装置.第2部分:40号 U型钩接头的规范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Specifications for clevis coupling 40 |
| BS ISO 7169-2007 | 航空航天.液压系统用24°锥形的、压力范围截至3000psi或21000kPa的可拆卸管接头.采购规范(英制/米制) | Aerospace - Separable tube fittings for fluid systems, for 24 ° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric |
| BS ISO 7241-2-2000 | 液压传动.快换接头.试验方法 | Hydraulic fluid power - Quick-action couplings - Test methods |
| BS ISO 7876-4-2005 | 燃油喷射装置.词汇.高压管和末端接头 | Fuel injection equipment - Vocabulary - High-pressure pipes and end-connections |
| BS ISO 8267-1-2006 | 飞行器.牵引杆附属接头的接口要求.干线飞行器 | Aircraft - Tow bar attachment fittings interface requirements - Main line aircraft |
| BS ISO 8267-2-2006 | 飞行器.牵引杆附属接头的接口要求.区域性飞行器 | Aircraft - Tow bar attachment fittings interface requirements - Regional aircraft |
| BS ISO 8434-2-2007 | 液压传动和通用金属管连接件.37°扩口管接头 | Metallic tube connections for fluid power and general use - 37 ° flared connectors |
| BS ISO 8434-3-2005 | 用于液压传动和一般用途的金属管接头.O形圈端面密封管接头 | Metallic tube connections for fluid power and general use - O-ring face seal connectors |
| BS SP 119 and SP 120-1957 | 航空用高强度钢叉形接头(统一螺纹) | High tensile steel fork joints (Unified threads) for aircraft |
| BS SP 33-39-1951 | 航空用旋转套筒、张力杆和型锻钢丝绳端面接头规范 | Specifications for turnbarrels, tension rods and swaged cable-end connections for aircraft |
| 编号 | 中文名称 | 英文名称 |