| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A48-720-1999 | 建筑物排水用铸铁管和配件及其接头和附件.要求、试验方法和质量保证 | (Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.) |
| NF A48-801-2002 | 水管用球墨铸铁管、配件和附件及其接头.要求和试验方法 | (Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods.) |
| NF A48-810-1995 | 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 | (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.) |
| NF A48-810/A1-1999 | 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 | (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.) |
| NF A48-820-1994 | 污水排放用球墨铸铁管、配件、附件及其接头.要求和试验方法 | (Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.) |
| NF A48-830-1983 | 铸制产品.有压力的饮用水聚氯乙烯管道用球墨铸铁接头 | (Foundry products. Spheroidal graphite cast iron sittings for PVC drinking water pipes under pressure.) |
| NF A48-860-1981 | 铸造产品.承压管道用可锻铸铁管道部件.承插系列.GS快速接头.连接尺寸和连接附件 | (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.) |
| NF A48-870-1981 | 铸造产品.承接管道用可锻铸铁管道部件.承插系列.GS标准接头.连接尺寸和连接附件 | (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.) |
| NF A49-150-2003 | 包括人类生活用水在内的水成液的传送用非合金钢管和管接头.技术交货条件 | (Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.) |
| NF A49-191-1975 | 钢管.毛细管焊接或焊接钎接用钢或铸铁接头.（尺寸.交货技术条件.） | (STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.) |
| NF A49-716-1998 | 钢管.焊接接头镀膜配件和管的外结构. | (STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.) |
| NF A72-120-1973 | 钢铁厂.气体管道和大直径阀.带法兰的接头（PN6） | (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.) |
| NF A80-022-1999 | 焊接.带说明的多语种接头术语 | (WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).) |
| NF A82-104-1-2000 | 电阻焊接设备.电极接头,外锥度1:10.第1部分:圆锥形接头,锥度1:10 | (Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.) |
| NF A82-104-2-2001 | 电阻点焊.外锥度1:10电极接头.第2部分:端推力电极用平行柄接头 | (Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2 : parallel shank fixing for end-thrust electrodes.) |
| NF A82-104-3-1992 | 电阻点焊.电极帽的活动接头 | (Resistance spot welding electrode caps.) |
| NF A84-420-1991 | 气焊设备和有关方法.减压阀入品接头.尺寸 | (Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.) |
| NF A84-444-2003 | 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求 | (Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices.) |
| NF A87-011-1994 | 带有电焊条的金属电弧熔焊、气体保护金属弧焊及气焊.钢接头的制备 | (Metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint preparations for steel.) |
| NF A87-013-2-1999 | 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊 | (WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).) |
| NF A87-013-3-2001 | 焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊 | (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.) |
| NF A89-057-8-2002 | 金属材料焊接程序规范和鉴定.焊接程序试验.第8部分:管对管-板接头的焊接 | (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.) |
| NF A89-208-1987 | 焊接和有关技术.点焊,凸焊或缝焊搭接接头 | (WELDING AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM WELDED LAP JOINTS.) |
| NF A89-231-1992 | 钢的弧焊接头.质量缺陷等级导则 | (ARC-WELDED JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 25817).) |
| NF A89-232-1994 | 铝和可焊合金的弧焊接头.质量缺陷等级导则 | (ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).) |
| NF A89-233-1996 | 焊接.电子束和激光束焊接接头.缺陷的质量级别导则.第1部分:钢 | (WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).) |
| NF A89-234-2001 | 焊接.电子和激光束焊接接头.缺陷的质量级别导则.第1部分:铝及其可焊合金 | (Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.) |
| NF A89-240-1987 | 焊接和有关技术.电阻点焊、凸焊或缝焊搭接接头.带解释的缺陷分类 | (WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.) |
| NF A89-430-2000 | 钎焊.钎焊接头的无损检验 | (Brazing - Non-destructive examination of brazed joints.) |
| NF A89-510-1997 | 焊缝的无损检验.焊接接头的X射线照相检验 | (Non-destructive examination of welds. Radiographic examination of welded joints.) |
| NF A89-510/A1-2003 | 焊接无损检验.焊接接头射线照相检验 | (Non-destructive examination of welds - Radiographic examination of welded joints.) |
| NF A89-511-1998 | 焊缝的无损检验.焊接接头的X射线照相检验.验收等级 | (Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels.) |
| NF A89-511/A1-2003 | 焊缝的无损检验.焊接接头的X射线照相检验.验收水平 | (Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels.) |
| NF A89-520-1997 | 焊缝的无损检验.焊接接头的超声波检验 | (Non destructive examination of welds. Ultrasonic examination of welded joints.) |
| NF A89-520/A1-2002 | 焊缝的无损检验.焊接接头的超声波检验 | (Non-destructive testing of welds - Ultrasonic testing of welded joints.) |
| NF A89-521-1997 | 焊缝的无损检验.焊接接头的超声波检验.验收等级 | (Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.) |
| NF A89-521/A1-2002 | 焊缝的无损检验.焊接接头的超声波检验.验收等级 | (Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels.) |
| NF A89-810-1-1999 | 热塑性半成品的焊接接头试验.第1部分:弯曲试验. | (Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.) |
| NF A89-810-3-2000 | 热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验. | (Testing of welded joints of thermoplastics semi-finished products - Part 3 : tensile creep test.) |
| NF A89-810-4-2002 | 热塑性半成品的焊接接头试验.第4部分:剥离试验 | (Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.) |
| NF A89-810-5-2000 | 热塑半成品焊接接头的试验.第5部分:宏观检验 | (Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.) |
| NF A89-810-7-2003 | 热塑性半成品焊接接头的试验.第7部分:腰形试验样品的抗拉试验 | (Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.) |
| NF A89-810-8-2002 | 热塑性半成品的焊接接头试验.第8部分:要求 | (Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.) |
| NF B34-001-1976 | 玻璃制仪器、管路及接头.硼硅3.3玻璃的特性 | (Glass plant, pipeline and fittings. Properties of borosilicate glass 3.3.) |
| NF B34-002-1976 | 玻璃制仪器、管路及接头.试验、操作和使用的一般规则 | (Glass plant, pipeline and fittings. General rules for testing, handling and use.) |
| NF B34-003-1999 | 玻璃制仪器、管路及接头.标称内径15-1000mm管与管接头.兼容性与互换性 | (Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to DN 1000. Compatibility and interchangeability.) |
| NF B35-008-1974 | 实验室用玻璃器皿.锥形瓶和带有磨光接头的有颈锥形瓶 | (LABORATORY GLASSWARE. CONICAL FLASKS. CONICAL FLASKS WITH CONICAL GROUND GLASS JOINT.) |
| NF B35-012-1972 | 实验室用玻璃器皿.带互换磨光元件的球形接头 | (INTERCHANGEABLE SPHERICAL GROUND JOINTS.) |
| NF B35-013-1983 | 实验室用玻璃器皿.带互换磨光锥形接头 | (Laboratory glassware. Interchangeable conical ground joints.) |
| NF B35-022-1977 | 实验室用玻璃器皿.蒸馏器配件.适配器.转接器.接头 | (LABORATORY GLASSWARE. COMPONENTS OF DISTILLATION EQUIPEMENT. ADAPTATORS-EXTENSIONS-UNIONS.) |
| NF C20-131-1974 | 铝导线用带导电镀层的有铝片或铜片的接头.规则和尺寸 | (LUGS WITH COPPER OR ALUMINIUM FLATS AND WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.) |
| NF C46-512-1999 | 工业处理控制阀.第3-3部分:尺寸.对焊接的头尾相接尺寸.两接头球型直接式控制阀(欧洲标准EN 60534-3-3) | (Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves.) |
| NF C52-152-1969 | 变压器.带凸缘的滑轮支架叉形接头和锁定装置 | (TRANSFORMERS. DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.) |
| NF C52-152M1-1970 | 变压器.带凸缘的滑轮支架叉形接头和锁定装置 | (TRANSFORMERS DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.) |
| NF C64-021-1991 | 交流电用高压设备.管线用的接头 | (CONNECTORS FOR TUBES.) |
| NF C66-495-1988 | 架空线路用绝缘子和器材.绝缘子链元件的球状头和球槽接头.特性尺寸 | (Insulators and fittings for overhead lines. Dimensions of ball and socket couplings of string insulator units.) |
| NF C66-496-1988 | 架空线路用绝缘子和器材.架空线路绝缘体和器材.绝缘子链元件的球状接头和球槽头锁定装置.第1部分：尺寸和一 | (Isolators and fittings for overhead lines. Locking devices for ball and socket couplings of string insulator units.) |
| NF C66-800-1978 | 架空线路用绝缘子和器材.架空线路连接件.接头，分接头和端点连接件 | (INSULATORS AND FITTINGS FOR OVERHEAD LINES. CONNECTION JOINTS FOR OVERHEAD LINES. JUNCTION JOINTS,TEE JOINTS,AND END-JOINTS.) |
| NF C74-347-1993 | 低型接头式可植入心脏起搏器(EN 50077) | (Low-profile connector implantable cardiac pacemakers.) |
| NF C93-421-1983 | 电子元件.连接元件.ＨＥ７型节距为２·５４mm单面印制电路板用插入式多触点接头 | (Electronic components. Connecting devices. Multicontact edge socket and board mounted connectors for single clad printed boards with 2,54 mm spacing. Type he 7. General requirements.) |
| NF C93-422-1977 | 电子元件.连接元件.多触点圆柱状接头.一般规定 | (Electronic components. Connecting devices. Circular multipole connectors.) |
| NF C93-423-1982 | 电子元件.连接元件.ＨＥ９型节距为２·５４mm双面印刷电路板用插入式多触点接头.特殊规范汇编 | (Electronic components. Connecting devices. Multicontact edge socket and board mounted connectors for double clad printed boards with 2,54 mm spacing. Type HE 9. General requirements.) |
| NF C93-424-1982 | 电子元件.连接元件.Ａ型插入式印刷电路板多触点接头及其相应的ＨＥ８型节距为１·２７mm的插座.一般规定 | (Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. General requirements.) |
| NF C93-425-1981 | 电子元件.连接元件.带外壳的支架和板条的多触点接头.一般要求 | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. MULTIPOLE CONNECTORS WITH SHELL FOR RACKS AND PANELS. GENERAL REQUIREMENTS.) |
| NF C93-426-1977 | 连接元件.模制件的矩形多触点接头.一般规定 | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. MULTIPOLE RECTANGULAR CONNECTORS WITHOUT SHELL. GENERAL REQUIREMENTS.) |
| NF C93-428-1981 | 电子元件. 连接元件.与纱包电缆自动剥离间距为１·２７mm的Ａ型多触点插入式接头及其垂直距离为２·５４mm | (ELECTRONIC COMPONENTS. CONNECTING DEVICES. INSULATION DISPLACEMENT CONNECTORS. TYPE HE 10. GENERAL REQUIREMENTS.) |
| NF C93-429-1986 | 质量保证的电子元件.连接元件.间距为２·５４mm的印刷电路板用插入式多触点接头.ＨＥ１１型.一般规定 | (Electronic components under quality assessment. Connecting devices. Multicontact board mounted connectors for printed boards with 2,24 mm spacing. Type he 11. General requirements.) |
| NF C93-462-1981 | 电子设备元件.终端连接系统.可移动蠕变式模件.接头.一般要求 | (Components for electronic equipment. Terminal junction system. Modules with removable crimp-type. Contacts. General requirements.) |
| NF C93-557-2001 | RF接头、接头电缆组件和电缆.互调程度测量 | (RF connectors, connector cable assemblies and cables - Intermodulation level measurement.) |
| NF C93-561-1981 | 电子元件.螺钉锁定的小型同轴接头.一般规定 | (Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.) |
| NF C93-562-1981 | 电子元件.弹簧栓耦接的小型同轴接头.一般规定 | (Components for electronic equipment. Miniature coaxial connectors with snap-on coupling. General requirements.) |
| NF C93-564-1981 | 电子元件.接线柱锁定射频用同轴接头（ＫＢＮ系列） | (Electronic components. Miniature coaxial connectors with bayonet coupling (kbn series). General requirements.) |
| NF C93-566-1981 | 电子元件.螺钉锁定射频用同轴接头（ＫＮ系列）.一般规定 | (ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.) |
| NF C93-570-1986 | 电子元件.射频同轴接头.１·６－５·５系列.７５Ω阻抗.ＫＴＢ型 | (RF COAXIAL CONNECTORS 1,6-5,6 SERIE CHARACTERISTIC IMPEDANCE 75 OHMS. TYPE KTB.) |
| NF C93-571-1986 | 电子元件.射频同轴接头.１·０－２·３系列.ＫＴＡ型 | (RF COAXIAL CONNECTORS 1,0-2,3 SERIE TYPE KTA.) |
| NF C93-618-3-2002 | 质量评定的石英晶体装置.第3部分:标准外形线和引线接头 | (Quartz crystal units for assessed quality - Part 3 : standard outlines and lead connections.) |
| NF C93-711-5-6-2003 | 印制板和印制板组件.设计和使用.第5-6部分:附件(结合区/接头)考虑.四面带有J形引线的片状载体 | (Printed boards and printed board assemblies - Design and use - Part 5-6 : attachment (land/joint) considerations - Chip carriers with J-leads on four sides.) |
| NF C93-867-2-1-2002 | 光纤通信系统中使用的接头组件和互连元件.产品规范.第2-1部分:端接在IEC 60793-2的B1类单模纤维上的FC-PC型 | (Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1 : type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre.) |
| NF C93-867-3-1-2002 | 光纤通信系统中使用的接头组件和互连元件.产品规范.第3-1部分:端接在IEC 60793-2的A1a类和A1b类多模纤维上 | (Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1 : type SG terminated on IEC 60793-2 category A1a and A1b multimode fibr) |
| NF C93-909-1-1-2001 | 光纤互连装置和无源元件性能标准.第1-1部分:总则和指南.互连装置(接头) | (Fibre optic interconnecting devices and passive components peformance standard - Part 1-1 : general and guidance - Interconnecting devices (connectors).) |
| NF D36-105-1976 | 燃气洗衣机内部连接用带机械接头的软管 | (FLEXIBLE HOSE WITH MECHANICAL CONNECTORS FOR JOINTS INSIDE GAS-POWERED WASHING MACHINES.) |
| NF D36-107-1994 | 家政学.家用管道煤气装置连接用的带机械接头的11号或12号聚酰胺基未增强软管 | (Household economy. Flexible piping based on polyamide 11 or 12 for the external connection of domestic appliances using gaseous fuels distributed by networks.) |
| NF D36-108-1983 | 家用灶具装配用挠性金属管内接头 | (INTERNAL CONNECTION OF DOMESTIC COOKING APPLIANCES BY MEANS OF FLEXIBLE METAL HOSES.) |
| NF D36-210-2001 | 建筑物燃气管道工程的螺纹接头再密封的方法 | (Means for resealing threaded joints of gas pipework in buildings.) |
| NF E04-202-2-1996 | 工业加工用管道、管道元件和仪器.图形符号表示.第2部分:管道和接头 | (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 2 : pipelines and junctions.) |
| NF E22-601-1985 | 联轴节.工业万向接头传动.定义.特性 | (Couplings. Industrial cardan shaft. Definition. Characteristics.) |
| NF E22-603-1985 | 联轴节.工业万向接头传动.验收 | (Couplings. Industrial cardan shaft. Acceptance.) |
| NF E22-604-1985 | 联轴节.工业万向接头传动.用法兰盘固定 | (Couplings. Industrial cardan shaft. Flange mounting.) |
| NF E29-032-1985 | 工业管道.钢制构件.对焊接头.准备 | (Industrial pipework. Steel components. Butt welding ends. Preparation.) |
| NF E29-042-1-2000 | 法兰及其接头.螺栓连接.第1部分:螺栓连接的选择 | (Flanges and their joints - Bolting - Part 1 : selection of bolting.) |
| NF E29-551-1939 | 钢制气体螺距的连接管.双接头 | (STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.) |
| NF E29-692-1-2001 | 气瓶.微电子工业用气瓶阀接头.第1部分:输出口接头 | (Gas cylinders - Gas cylinder valve connections for use in the micro-electronics industry - Part 1 : outlet connections.) |
| NF E29-692-2-2001 | 气瓶.微电子工业用气瓶阀接头.第2部分:气瓶阀接头的规范和型式试验 | (Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinder connections.) |
| NF E29-901-1-2001 | 法兰及其接头.分级标识法兰用垫圈.第1部分:有或无插件的非金属平垫圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 1 : non-metallic flat gaskets with or without inserts.) |
| NF E29-901-2-2001 | 法兰及其接头.分级标识法兰用垫圈.第2部分:与钢法兰一起使用的螺旋形绕制垫圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 2 : spiral wound gaskets for use with steel flanges.) |
| NF E29-901-3-2001 | 法兰及其接头.分级标识法兰用垫圈.第3部分:非金属PTFE包封垫圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 3 : non-metallic PTFE envelope gaskets.) |
| NF E29-901-4-2001 | 法兰及其接头.分级标识法兰用垫圈.第4部分:与钢法兰一起使用的波纹形、平的或带槽的金属和嵌条金属垫圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.) |
| NF E29-901-5-2001 | 法兰及其接头.分级标识法兰用垫圈.第5部分:与钢法兰一起使用的金属环接垫圈 | (Flanges and their joints - Gaskets for Class-designated flanges - Part 5 : metallic ring-joint gaskets for use with steel flanges.) |
| NF E29-902-1-1997 | 法兰及其接头.PN指定法兰用垫圈的尺寸.第1部分:有或无衬套的非金属平垫圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 1 : non-metallic flat gaskets with or without inserts.) |
| NF E29-902-2-1997 | 法兰及其接头.PN指定法兰用垫圈的尺寸.第2部分:与钢法兰配套使用的螺旋绕线垫圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 2 : spiral wound gaskets for use with steel flanges.) |
| NF E29-902-3-1997 | 法兰及其接头.PN指定法兰用垫圈的尺寸.第3部分:非金属聚四氟乙烯封装垫圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 3 : non-metallic PTFE envelope gaskets.) |
| NF E29-902-4-1997 | 法兰及其接头.PN指定法兰用垫圈的尺寸.第4部分:与钢法兰配套使用的波纹形、平的或开槽金属和填充金属垫圈 | (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.) |
| NF E39-012-2003 | 区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外护层的入户钢管用接头组件 | (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye) |
| NF E48-051-1992 | 液压传动.进气口上的步进管螺纹接头.接头尺寸 | (Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.) |
| NF E48-064-1998 | 液压传动和一般用金属导管的连接.第1部分:24喇叭形压合接头 | (Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.) |
| NF E49-090-2-2003 | 气压传动.18mm和26mm五气口方向控制阀.第2部分:带光学电接头的安装面 | (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.) |
| NF E62-541-1984 | 工具自动变换工具用的连接锥.锥体Ｎ度４０，４５，５０的７／２４锥度工具柄的拉制接头 | (Tool shank taper rate 7/24 for automatic tool changer. Retention knobs for shanks no 40, 45, 50.) |
| NF E62-542-1990 | 自动更换刀具用的7/24锥度刀柄.NO.30锥体及相应的拉伸接头.尺寸 | (TOOL SHANKS WITH 7/24 TAPERS FOR AUTOMATIC TOOL CHANGERS. SHANKS NO 30 AND CORRESPONDING RETENTION KNOBS. DIMENSIONS.) |
| NF E86-400-1-2001 | 法兰和接头.衬垫环形法兰连接的设计规则.第1部分:计算方法 | (Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method.) |
| NF F00-364-1991 | 通用铁路设备.与电引线有关的产品.电线接头的插片尺寸为:2.8×0.5,5×0.8,6.3×0.8mm | (RAILWAY MATERIAL IN GENERAL. PRODUCTS FOR ELECTRICAL CONNECTIONS. 2,8 X 0,5. 5 X 0,8. 6,3 X 0,8 MM.) |
| NF F01-082-1968 | 铁路车辆.管路. 软管接头（非金属） | (RAILWAY TRANSPORT EQUIPMENT. PIPEWORK. FIXING OF NON-METALLIC FLEXIBLE PIPES.) |
| NF F01-082M-1970 | 铁路车辆.管路.软管接头(非金属) | () |
| NF F01-810-1990 | 铁路车辆.非合金钢或低合金钢电弧焊和电阻焊接头.设计与施工规则 | (RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.) |
| NF F01-812-1-1990 | 铁路车辆.钢的电弧和电阻焊接接头.第1部分:对接焊和角接接头中缺陷验收准则 | (RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.) |
| NF F01-820-1992 | 铁路车辆.车身用铝合金焊接接头(焊缝) | (RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.) |
| NF F11-013-1984 | 铁路车辆.压缩空气制动. ２５mm自动制动装置连接头 | (Railway rolling stock. Compressed-air brake. Coupling head for 25 mm automatic brake pipe.) |
| NF F11-014-1970 | 铁路车辆.压缩空气制动装置. 直通式自动制动连接头 | (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE. DIRECT BRAKE COUPLING HEAD.) |
| NF F11-015-1984 | 铁路车辆. 空气导管. ２５mm主要导管的连接头 | (Railway rolling stock. Air pipes. Coupling head for 25 mm main brake pipe.) |
| NF F11-069-1988 | 铁路车辆.气动部件检验设备的用接头 | (ROLLING STOCK. CONNECTIONS FOR PNEUMATIC-GEAR CONTROL EQUIPMENT.) |
| NF F11-101-1994 | 铁路车辆.有凸缘的气动要装置的接头和密封接触面 | (Railway rolling stock. Connecting and airtight interfaces for flanged pneumatic apparatuses.) |
| NF F20-028-1950 | 通用铁路设备.气炉堵. 接头 | (RAILWAY MATERIAL IN GENERAL. BUFFER SEALS.) |
| NF F24-005-1968 | 铁路车辆.轻型器材.管道系统.摆动式管接头 | (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.) |
| NF F31-011-1983 | 铁路车辆.非饮用水贮水箱的注水接头 | (Rolling stock. Connecting pipe for filling non-drinking water tanks.) |
| NF F36-001-1975 | 铁路车辆.工业货车. 标称直径为５０的通用“ＡＩＲ“ 调节接头 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. STANDARD 50 MM AIR COUPLING.) |
| NF F36-002-1974 | 铁路运输设备.工业货车.50MM气体导径管接头 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.) |
| NF F36-003-1977 | 铁路车辆.工业货车. 标称直径为５０的通用“ＡＩＲ“ 接头的安装 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. PLUG FOR STANDARD 50 MM AIR COUPLING.) |
| NF F36-004-1977 | 铁路车辆.工业货车. ＧＵＩＬＬＥＭＩＮ系统对称快速半接头的安装 | (RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. ALTERNATIVES FOR FITTING STANDARD 50 MM AIR COUPLING.) |
| NF F38-001-1975 | 铁路运输设备.采用最大压力为2.5bar排空的散装粉状产品运输用气动排空车.粉导管用统一接头 | (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE,FOR CARRYING POWDER GOODS IN BULK WITH DISCHARGE AT MAXIMUM OPERATING PRESSURE OF 2.5 BAR. STANDARD AIR PIPE CONNECTION.) |
| NF F38-002-1971 | 铁路运输设备.采用最大压力为2.5bar排空的散粉状产品运输用气动排空车.散粉导管用统一接头 | (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE FOR CARRYING POWDER GOODS IN BULK. DISCHARGE AT MAXIMUM SERVICE PRESSURE OF 2.5 BARS.) |
| NF F38-002M-1976 | 铁路运输设备.采用最大压力为2.5bar的散装粉状产品运输用气动排空车.排空粉导管用统一接头 | () |
| NF F61-011-1989 | 铁路车辆.电气连接用铜螺旋旋入接头.紧固扭矩G.纺织和皮革 | (Railway rolling stock. Screwed joint for electrical copper connections driving torque.) |
| NF F61-021-1990 | 铁路车辆.用于铝制导电引线的螺纹接头.上紧力矩 | (RAILWAY ROLLING STOCK. SCREWED JOINT FOR ELECTRICAL ALUMINIUM CONNCECTIONS DRIVING TORQUE.) |
| NF G07-310-1981 | 纺织.缝纫线试验.接头拉断力的测定方法 | (TEXTILES. SEWING THREAD TESTS. METHOD OF DETERMINATION FO BREAKING LOAD OF SNARLING.) |
| NF G38-116-1996 | 土工织物.用大宽度法测定接头/接缝处的拉伸试验 | (GEOTEXTILES. TENSILE TEST FOR JOINTS/SEAMS BY WIDE/WIDTH METHOD. (EUROPEAN STANDARD EN ISO 10321).) |
| NF H50-010-2-2000 | 货架接头试验方法.第2部分:货架钉子和钩环头拉伸抗性和回缩特性的测定 | (Methods of test for pallet joints - Part 2 : determination of withdrawal and head pull-through resistance of pallet nails and staples.) |
| NF J33-372-1987 | 游艇.不锈钢缆用拉紧装置和活动缆的固定接头.尺寸 | (Small craft. Rigging screws for stainless steel wire rope. Principal dimensions for forks, connection pins and eye-holes.) |
| NF J43-805-1-1997 | 造船和海上建筑物.饮用水箱注水接头.第1部分:总要求 | (Shipbuilding and marine structures. Filling connection for drinking water tanks. Part 1 : general requirements.) |
| NF J43-805-2-1997 | 造船和海洋建筑物.饮水罐用装水接头.第2部分:组件 | (Shipbuilding and marine structures. Filling connection for drinking water tanks. Part 2 : components.) |
| NF J45-910-1949 | 造船工业.传话管.接头 | (SHIPBUILDING. VOICE-PIPES. JOINTS.) |
| NF J82-214-1967 | 造船工业.管道.接头.分类和应用 | (INLAND NAVIGATION. PIPING. SEALING RINGS. CLASSIFICATION AND USE.) |
| NF L20-026-1995 | 航空航天系列.插销.尺寸和接头选择.设计标准 | (Aerospace series. Spigots. Dimensions and fit selection. Design standard.) |
| NF L31-512-1966 | 球面轴承接头.(RECH.). | (SPHERICAL BEARING JOINTS. (RECH.).) |
| NF L34-430-1954 | 机载仪表.挠性操纵接头 | (FLIGHT DECK INSTRUMENTS,FLEXIBLE CONTROL CONNECTIONS. (RECH.).) |
| NF L35-140-1966 | 操纵连杆用叉形接头.叉尾柄带螺纹的式样.(RECH.) | (FORK JOINTS FOR CONTROL LINKAGE. MODEL WITH THREADED END. (RECH.).) |
| NF L35-150-1974 | 滚珠球形接头.无纵向槽的长螺纹杆.尺寸和负荷 | (ROD-ENDS WITH SELF-ALIGNING BALL BEARINGS. LONG THREADED SHANK WITHOUT KEYWAY. DIMENSIONS AND LOADS.) |
| NF L35-151-1974 | 滚珠球形接头.有纵向槽的长螺纹杆.尺寸和负荷 | (ROD-ENDS WITH SELF-ALIGNING BALL BEARINGS. LONG THREADED SHANK AND KEYWAY. DIMENSIONS AND LOADS.) |
| NF L35-170-1974 | 有自润滑装置的球形接头.无纵向槽的长螺纹杆.尺寸和负荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK WITHOUT KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-171-1974 | 有自润滑装置的球形接头有纵向槽的长螺纹杆.尺寸和负荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK AND KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-450-1954 | 带螺纹尾柄型传动球形接头 | (BALL JOINTS FOR CONTROLS,THREADED END. (RECH.).) |
| NF L35-451-1967 | 小型控制机构用带螺纹尾柄的球形接头 | (BALL JOINTS FOR SMALL CONTROLS,THREADED END (RECH.).) |
| NF L35-452-1980 | 小型传动装置用带颈的螺纹端头的球形接头 | (BALL JOINTS FOR SMALL CONTROLS. THREADED END AND UNDERCUT.) |
| NF L36-121-1966 | 缆绳咬合带孔接头.(RECH.) | (EYE ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-122-1966 | 缆绳咬合叉形接头.(RECH.) | (FORK ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-123-1966 | 连接缆绳和链的链接头.(RECH.) | (CRIMPING FERRULES FOR ATTACHING CABLES TO CHAINS. (RECH.).) |
| NF L36-124-1966 | 缆绳咬合螺纹接头.(RECH.) | (SCREWED ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-128-1966 | 缆绳咬合球形接头.(RECH.) | (BALL ENDS FOR SWAGING ON CABLE. (RECH.).) |
| NF L36-135-1971 | 拉紧螺杆叉形接头 | (SCREWED END FORKS.) |
| NF L36-137-1971 | 转动拉紧螺杆叉形接头.技术规范 | (SCREWED END FORKS FOR BALL BEARINGS.) |
| NF L36-139-1971 | 嵌入缆绳的拉紧螺杆接头 | (SCREWED ENDS FOR SWAGING ON CABLE.) |
| NF L36-141-1971 | 嵌入缆绳的带孔接头 | (EYE ENDS FOR SWAGING ON CABLE.) |
| NF L36-142-1971 | 嵌入缆绳的叉形接头 | (FORK ENDS FOR SWAGING ON CABLE.) |
| NF L36-143-1971 | 嵌入缆绳的转动叉形接头 | (FORK ENDS FOR BALL BEARINGS FOR SWAGING ON CABLE.) |
| NF L36-144-1971 | 嵌入缆绳的球形接头 | (BALL ENDS FOR SWAGING ON CABLE.) |
| NF L36-202-1989 | 航空和航天系列.钢制抗腐蚀拉紧螺杆用带眼接头.尺寸和负载 | (Aerospace series. Eye-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.) |
| NF L36-203-1989 | 航空和航天系列.钢制抗腐蚀拉紧螺杆用带眼接头.尺寸和负载 | (Aerospace series. Fork-ends, threaded, control cable in corrosion resisting steel. Dimensions and loads.) |
| NF L36-204-1989 | 航空和航天系列.钢制抗腐蚀轴承用拉紧螺杆叉形接头.尺寸和负载 | (Aerospace series. Fork-ends, threaded, control cable for rolling bearings in corrosion resisting steel. Dimensions and loads.) |
| NF L36-205-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀拉紧螺杆接头.尺寸和负载 | (AEROSPACE SERIES. STUD-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CALBLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2357).) |
| NF L36-206-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀带眼接头.尺寸和负载 | (AEROSPACE SERIES. EYE-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2358).) |
| NF L36-207-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀叉形接头.尺寸和负载 | (AEROSPACE SERIES. FORK-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2359).) |
| NF L36-208-1989 | 航空和航天系列.抗嵌入操纵缆索的钢制抗腐蚀球体端面接头.尺寸和负载 | (AEROSPACE SERIES. FORK-ENDS,FOR ROLLING BEARINGS IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2360).) |
| NF L36-209-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀球端面接头.尺寸和负载 | (AEROSPACE SERIES. BALL-ENDS,DOUBLE SHANK IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2361).) |
| NF L36-210-1989 | 航空和航天系列.嵌入操纵缆索的钢制抗腐蚀球面接头.尺寸和负载 | (AEROSPACE SERIES. BALL-ENDS,IN CORROSION RESISTING STEEL SWAGED ON TYPE,CONTROL CABLE. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2362).) |
| NF L36-211-1989 | 航空系列.操纵缆索的拉紧螺杆接头.尺寸 | (AEROSPACE SERIES. LOCKING CLIPS FOR TURNBUCKLES OF CONTROL CABLES. DIMENSIONS. (EUROPEAN STANDARD EN 2363).) |
| NF L36-222-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的球形可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2790) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK WITH ENGAGEMENT : 1,5 THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2790).) |
| NF L36-223-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的单包边可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2791) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT : 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2791).) |
| NF L36-224-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的双包边可调接头.螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2792) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT :1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2792).) |
| NF L40-100-1966 | 飞行器的液体装置.管道接头基本尺寸 | (INSTALLATION OF FLUIDS ABOARD AIRCRAFT. BASIC DIMENSIONS OF HOSE CONNECTIONS.) |
| NF L40-101-1974 | 轴向密封接头.ＩＳＯ米制阴螺纹剖面的凹端和BNAE公差 | (CONNECTORS,AXIAL SEALING. INTERNAL THREAD BOSSES,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L40-102-1966 | 飞机的液体装置.国际单位米制螺纹凸端的轴向密封接头 | (AIRCRAFT FLUID INSTALLATIONS. CONNECTORS,AXIAL SEALING,MALE THREAD FITTINGS. SIM THREAD. (RECH.).) |
| NF L40-103-1974 | 轴向密封接头.ISO米制螺纹剖面的凸端和BNAE公差 | (CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L40-104-1973 | 轴向密封接头.ISO米制螺纹剖面的凸端和ISO米制螺纹公差 | (CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L40-105-1973 | 轴向密封接头.ISO 米制阴螺纹剖面凸端和ISO米制螺纹公差 | (CONNECTORS,AXIAL SEALING. INTERNAL THREAD BOSSES,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L40-112-1987 | 航空和航天.经向密封接头.阳螺纹剖面和ISO 米制螺纹公差.尺寸 | (Aerospace fitting joint assembly, radial sealing. Male thread fittings. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-113-1987 | 航空和航天.经向密封接头.阴螺纹剖面和ISO 米制螺纹公差.尺寸 | (Aerospace fitting joint assembly, radial sealing. Internal thread bosses. ISO metric thread profile and tolerances. Dimensions.) |
| NF L40-114-1987 | 航空和航天.径向密封接头.环形接头.尺寸 | (Aerospace fitting joint assembly, radial sealing. O-rings. Dimensions.) |
| NF L40-120-1983 | 液压系统.米制接头的接触面 | (FLUID SYSTEMS. INTERFACE OF METRIC COUPLINGS.) |
| NF L41-210-1983 | 液体系统.软管、管道和接头的脉冲试验 | (Fluid systems. Impulse testing of hose, tubing and fittings.) |
| NF L41-212-1983 | 液压系统.管子和接头的热冲击试验 | (FLUID SYSTEMS. THERMAL SHOCK TESTING OF PIPING AND FITTINGS.) |
| NF L41-230-1985 | 飞行器.液压管路组装和接头.旋转弯曲试验 | (AIRCRAFT. HYDRAULIC TUBING JOINTS AND FITTINGS. ROTARY FLEXURE TEST.) |
| NF L43-110-1966 | 飞行器的液体装置.软管用插入接头 | (AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS FOR FLEXIBLE HOSES.) |
| NF L43-210-1973 | 环形接头（RT）、一般互换条件、ISO 米制螺纹剖面和BNAE公差 | (CYLINDRICAL UNION. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L43-211-1973 | 环形接头用阳螺纹部件 | (MALE PARTS FOR CYLINDRICAL UNION.) |
| NF L43-212-1973 | 环形接头用连接螺母 | (UNION NUTS FOR CYLINDRICAL UNION.) |
| NF L43-213-1973 | 环形接头的双外螺丝接头 | (DOUBLE UNIONS FOR CYLINDRICAL UNION.) |
| NF L43-215-1973 | 环形接头（RT）.一般互换条件.ISO 米制螺纹剖面和公差 | (CYLINDRICAL UNION. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-310-1973 | 可旋转管接头（RO）.一般互换条件.ISO 米制螺纹剖面和BNAE公差 | (SWIVEL CONNECTORS. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.) |
| NF L43-311-1973 | 低压旋转接头的环形部分 | (SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,ANNULAR PART.) |
| NF L43-312-1973 | 低压旋转接头的空心螺栓 | (SWIVEL CONNECTORS FOR LOW PRESSURE APPLICATIONS,BANJO BOLT.) |
| NF L43-315-1973 | 旋转接头（RO）.一般互换条件.ISO 米制螺纹剖面和公差 | (SWIVEL CONNECTORS. GENERAL CONDITIONS OF INTERCHANGEABILITY,ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-360-2002 | 航空航天系列.钛合金管联接器8°30'.带螺纹的管端弯接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded, end, threaded.) |
| NF L43-362-2002 | 航空航天系列. 8°30'钛合金管连接件.直接头 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight.) |
| NF L43-363-2002 | 航空航天系列. 8°30'钛合金管连接件.直减径接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, straight, reducer.) |
| NF L43-364-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直角管接头 | (Aerospace series - Pipe couplings 8 o30' in titanium alloy - Unions, straight bulkhead.) |
| NF L43-365-2002 | 航空航天系列.8°30'钛合金管联接件.隔壁直角弯接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, welded end.) |
| NF L43-366-2002 | 航空航天系列.钛合金管联接器8°30'.带密封环的异径管端接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Adaptors, reduced pipe end, with lockring.) |
| NF L43-390-2002 | 航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long.) |
| NF L43-391-2002 | 航空航天系列.8°30'钛合金管联接件. 长型隔壁直通接头焊接端 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead, long, welded end.) |
| NF L43-396-2002 | 航空航天系列.钛合金管联接器8°30'.十字T形管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, cross.) |
| NF L43-407-2002 | 航空航天系列.钛合金管联接器8°30'.检修用焊接端部的闷头管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead welded end, for repair.) |
| NF L43-408-2002 | 航空航天系列.钛合金管联接器8°30'.检修用长的焊接端部的闷头管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, bulkhead long welded end, for repair.) |
| NF L43-409-2002 | 航空航天系列.钛合金管联接器8°30'.检修用焊接端加螺纹的管接头 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Unions, welded end threaded for repair.) |
| NF L43-550-1988 | 航空航天轮机设备.快卸低压接头.一般互换条件 | (AEROSPACE. CABIN EQUIPMENTS. LOW PRESSURE QUICK DISCONNECT COUPLING. GENERAL CHARACTERISTICS.) |
| NF L43-581-1967 | 飞行器的液体装置.管端插入接头.(RECH.) | (AIRCRAFT FLUID INSTALLATIONS. PLUG-IN UNIONS,TUBE END. (RECH.).) |
| NF L43-582-1966 | 飞行器液体装置.橡胶管接头.(RECH.) | (AIRCRAFT FLUID INSTALLATIONS. CONNECTORS FOR RUBBER HOSE. (RECH.).) |
| NF L43-586-1972 | 螺钉固定光滑接头.ISO 螺纹剖面和公差 | (PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.) |
| NF L43-587-1973 | 橡胶管接头.ISO 米制螺纹剖面和公差 | (RUBBER HOSE CONNECTIONS. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L43-601-1974 | 带法兰的接头.连接法兰 | (FLANGED CONNECTIONS - FLANGES FOR UNIONS.) |
| NF L43-602-1974 | 带法兰的接头.凹端 | (FLANGED CONNECTIONS - INTERNAL BOSSES.) |
| NF L43-603-1974 | 带法兰的接头.环形接头 | (FLANGED CONNECTIONS. O-RINGS.) |
| NF L43-611-1977 | 不锈钢制钎接带法兰的直接头 | (FLANGED STRAIGHT UNIONS,SOLDER TYPE,STAINLESS STEEL.) |
| NF L43-618-2003 | 航空航天系列.耐热钢制37度管接头.转动螺套.英制 | (Aerospace series - Pipe coupling 37 o, in heat resisting steel - Swivel nuts - Inch series.) |
| NF L43-619-2003 | 航空航天系列.耐热钢制37度管接头.焊接端直通接管头.英制 | (Aerospace series - Pipe couplings, 37 o, spherical, in heat resisting steel - Straight nipples, welded end - Inch series.) |
| NF L43-620-2003 | 航空航天系列.60度钛合金管接头.油口接头 | (Aerospace series - Pipe couplings, 60 o, in titanium alloy - Port connection.) |
| NF L43-621-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.直通转动螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight.) |
| NF L43-626-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.拉力张线用转动螺套 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire.) |
| NF L43-627-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.焊接的90度弯头 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Elbows 90 o, welded.) |
| NF L43-628-2003 | 航空航天系列.60度钛合金TI-P64001球形管接头.钢FE-PA13制拉力张线 | (Aerospace series - Pipe couplings, 60 o, spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA13.) |
| NF L43-629-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的90度弯管接头.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Elbow 90 o nipples, welded end - Inch series.) |
| NF L43-630-2003 | 航空航天系列.耐热钢制37度球形管接头.加螺纹直活管节.英制 | (erospace series - Pipe coupling 37 o, spherical, in heat resisting steel - Straight unions, threaded - Inch series.) |
| NF L43-631-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的箍.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - ferrules, welded end - Inch series.) |
| NF L43-632-2003 | 航空航天系列.耐热钢制37度管接头.管套组件.英制 | (Aerospace series - Pipe coupling, 37 o, in heat resisting steel - Cap assemblies - Inch series.) |
| NF L43-633-2003 | 航空航天系列.耐热钢制37度球形管接头.端部焊接的三通接头.英制 | (Aerospace series - Pipe coupling, 37 o, spherical, in heat resisting steel - Tees nipples, welded end - Inch series.) |
| NF L43-634-2003 | 航空航天系列.高达21000 kPa的37度球形管接头.英制.技术规范 | (Aerospace series - Pipe coupling, 37 o, spherical, up to 21 000 kPa - Inch series - Technical specification.) |
| NF L43-635-2003 | 航空航天系列.耐热钢制焊接管接头.90度弯头.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbows 90 o - Inch series.) |
| NF L43-636-2003 | 航空航天系列.耐热钢制焊接管接头.减速器.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series.) |
| NF L43-637-2003 | 航空航天系列.耐热钢制焊接管接头.三通管.英制 | (Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series.) |
| NF L44-070-1979 | 空中加油.接头的尺寸特性和功能 | (IN-FLIGHT REFUELLING EQUIPMENT. DIMENSIONAL AND FUNCTIONAL CHARACTERISTICS OF CONNECTIONS.) |
| NF L44-511-1985 | 飞机的地面供给.小流量接头 | (Ground supply. Low flow connection.) |
| NF L44-512-1973 | 低压接头.ISO 米制螺纹剖面和BNAE公差 | (AIRCRAFT GROUND SUPPLY. LOW PRESSURE CONNECTION. ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. (RECH.).) |
| NF L44-514-1975 | 低压气动起动接头 | (Low pressure compressed air starting connections.) |
| NF L44-515-1989 | 航空和航天流体装置里的供氧接头 | (Aerospace. Gaseous oxygen replenishment for use in fluid systems (old type). Dimensions (inch series).) |
| NF L44-516-1979 | 液氧流入接头 | (Liquid oxygen replenishment couplings.) |
| NF L44-517-1980 | ISO 米制螺纹剖面和公差低压接头 | (Low pressure connections, ISO metric thread profile and tolerances.) |
| NF L44-518-1990 | 机舱地面增压试验用接头 | (Aircraft. Ground pressure testing connections for pressure cabins. Dimensions (inch series).) |
| NF L44-519-1984 | 氧气面罩和氧气源的接头 | (Joints for connecting crew member`S regulators masks to oxygen sources.) |
| NF L44-520-1974 | 空调用２００mm接头 | (200 mm air-conditioning connections.) |
| NF L44-521-1974 | 空调用１３０mm接头 | (130 mm air-conditioning connections.) |
| NF L44-532-1977 | 飞机地面给养.加压饮用水源接头 | (AIRCRAFT GROUND SUPPLY. CONNECTIONS FOR DRINKING WATER SUPPLIED UNDER PRESSURE.) |
| NF L44-540-1974 | 甲醇水压力供水接头.标定尺寸19mm | (Water-methanol pressure connections. Nominal dimension 19 mm.) |
| NF L44-541-1974 | 甲醇水压力供水接头.标定尺寸38mm | (Water-methanol pressure connections. Nominal dimension 38 mm.) |
| NF L44-550-1978 | 润滑油压力注入接头 | (Pressure re-oiling connection.) |
| NF L44-570-1980 | 飞机地面给养.燃料加压注入接头 | (Aircraft ground supply. Pressure refuelling connections.) |
| NF L44-615-1989 | 航空和航天.液体系统用的液态氧的.注入接头尺寸(英制) | (Aerospace. Gaseous oxygen replenishment for use in fluid systems (new type). Dimensions (inch series).) |
| NF L46-012-1986 | 环形接头.６４Ｃ８氧烃橡胶.精确度Ａ验.质量分类 | (O-RINGS. FLUOROCARBON RUBBER 64C8. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-013-1986 | 环形接头.２１Ａ７丙烯丁二烯--晴橡胶.精确度Ａ级.质量３级 | (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 21A7. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-014-1986 | 环形接头.２０Ａ８丙烯丁二烯－晴橡胶.精确度Ａ级.质量３级 | (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20A8. PRECISION CLASS A. QUALITY CLASS 3.) |
| NF L46-015-1987 | 环形接头.２０Ｂ８丙烯丁二烯- 晴橡胶.精确度Ａ级.性能３级 | (O-RINGS. BUTADIENE ACRYLONITRILE RUBBER 20B8. PRECISION CLASS A. PERFORMANCE CLASS 3.) |
| NF L46-016-1987 | 环形接头.４１Ｂ８丁烯丙烯橡胶.精确度Ａ级.性能３级 | (O-RINGS. ETHYLENE-PROPYLENE RUBBER 41B8. PRECISION CLASS A. PERFORMANCE CLASS 3.) |
| NF L46-322-1980 | NFL ４０- １０４和类似型式接头阳螺纹端用金属保护外壳.ISO 米制螺纹剖面和公差 | (PROTECTIVE,METALLIC,CAP,FOR NF L 40-104 MALE FITTINGS AND SIMILAR TYPES. ISO METRIC THREAD PROFILE AND TOLERANCES.) |
| NF L46-331-2002 | 航空航天系列.8°30'钛合金管接头.压合栓 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Pressure plugs.) |
| NF L46-332-2002 | 航空航天系列.钛合金 8°30'管接头.带动态梁密封端的单头卡套 | (Aerospace series - Pipe coupling 8 o30' in titanium alloy - Ferrules, blind, with dynamic beam seal end.) |
| NF L46-334-2002 | 航空航天系列.8°30'管接头.螺母防护帽 | (Aerospace series - Pipe coupling 8 o30' - Protective caps.) |
| NF L46-335-2002 | 航空航天系列.8°30'接头.外螺纹防护栓 | (Aerospace series - Pipe coupling 8 o30' - Protective plugs with external threads.) |
| NF L46-336-2002 | 航空航天系列.8°30'接头.内螺纹防护栓 | (Aerospace series - Pipe coupling 8 o30' - Protective caps with internal threads.) |
| NF L48-135-1972 | 燃料计量器、燃料泵等接头的使用互换性（ISO 螺纹剖面和公差） | (IN-SERVICE INTERCHANGEABILITY. FLANGES FOR LEVEL INDICATORS,FUEL PUMPS,ETC... (ISO THREAD PROFILE AND TOLERANCES).) |
| NF L54-191-1988 | 航空器材.后部非密封的闭锁的,带塑料箱的,使用温度55℃-175℃的密封矩形电接头 | (CONNECTORS,ELECTRICAL,RECTANGULAR,WITH SEALED AND NON SEALED REAR,PLASTIC SHELL,LOCKING DEVICE AND OPERATING TEMPERATURES. 55 DEGREES C TO 175 DEGREES C.) |
| NF L92-311-1966 | 机上起重支垫用回转接头.(RECH.) | (SWIVEL JOINTS FOR AIRCRAFT JACKING PADS. (RECH.).) |
| NF M82-237-1955 | 煤矿器材和工具.煤矿器材和工具.压缩空气管.变径管接头 | (MINING EQUIPMENT. COMPRESSED AIR PIPES. CONICAL REDUCTION COUPLINGS.) |
| NF M82-426-1987 | 煤矿器材.液压传送接头.尺寸和特性 | (Coal mine equipment. Connections for hydraulic transmissions. Sizes and characteristics.) |
| NF M88-081-1974 | 道路油罐车.液态化学产品金属油罐.排放装置.快速接头 | (ROAD TANKERS. METAL TANKERS FOR LIQUID CHEMICAL PRODUCTS. DISCHARGE DEVICES : QUICK-ACTION COUPLINGS.) |
| NF M88-768-1980 | 液化烃容器装置.气态物质用接头软管 | (INSTALLATIONS FOR LIQUEFIED HYDROCARBONS IN CONTAINERS. FLEXIBLE COUPLINGS FOR GAS PHASE.) |
| NF M88-769-1977 | 商用丙烷可动容器装置.接头.自动换向装置.制造.功能.试验 | (COMMERCIAL PROPANE INSTALLATIONS IN MOVABLE CONTAINERS. AUTOMATIC COUPLER-REVERSER. CONSTRUCTION-OPERATION-TESTS.) |
| NF M88-770-1986 | 商用丁烷钢瓶装置.接头.自动换向装置.制造.功能.试验 | (COMMERCIAL BUTANE INSTALLATIONS IN CYLINDERS. AUTOMATIC CHANGEOVER. CONSTRUCTION. OPERATION. TESTS.) |
| NF P12-602-2000 | 圬工辅助成份的试验方法.第2部分:灰浆粘结处预制床接头增强的粘结强度的测定 | (Methods of test for ancillary components for masonry - Part 2 : determination of bond strength of prefabricated bed joint reinforcement in mortar joints.) |
| NF P16-304-1997 | 地下排水管道用纤维水泥管.第1部分:重力循环系统用管子、接头和配件(欧洲标准EN 588-1) | (Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.) |
| NF P16-321-1-1996 | 排水排污用陶管、配件和管接头.第1部分:要求(欧洲标准EN 295-1) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 1 : requirements.) |
| NF P16-321-4-1995 | 排水管和污水管用的陶土管和配件及管接头.第4部分:专用配件、转换接头和可互换附件的要求(EN 295-4) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 4 : requirements for special fittings, adaptors and compatible accessories.) |
| NF P16-321-5-1994 | 排水及污水用陶土管道,配件和管接头.第5部分:多孔陶土管道和配件的要求(EN 295-5) | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.) |
| NF P16-321-6-1996 | 排水及污水用陶土管道.配件和管接头.第6部分:陶土管道的出入水孔的要求 | (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.) |
| NF P16-321-7-1996 | 排水及污水用陶土管道.配件和管接头.第7部分:陶土管道和管道插孔用连接件的要求 | (Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.) |
| NF P16-361-5-1997 | 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.) |
| NF P21-380-2002 | 木结构.试验方法.机械紧固件用接头的循环试验 | (Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners.) |
| NF P24-505-2000 | 门窗制造用未增塑聚氯乙烯型材.焊接弯头和T接头强度的测定 | (Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T-joints.) |
| NF P41-302-1994 | 纤维水泥制品.压力管道和接头(欧洲标准EN 512) | (Fibre-cement products. Pressure pipes and joints.) |
| NF P41-400-1995 | 包括接头和配件的混凝土压力管的共同要求 | (Common requirements for concrete pressure pipes including joints and fittings.) |
| NF P41-401-1995 | 包括接头和配件的非圆柱型加筋混凝土压力管 | (Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings.) |
| NF P41-402-1995 | 包括接头和配件的圆柱型加筋混凝土压力管 | (Reinforced concrete pressure pipes, cylinder type, including joints and fittings.) |
| NF P41-403-1995 | 包括接头和配件的圆柱型和非圆柱型预应力混凝土压力管及管用预应力钢的具体要求 | (Prestressed concrete pressure pipes, cylcinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes.) |
| NF P85-210-1-2002 | DTU 44.1.建筑工程.使用密封剂的密封接头面.第1部分:技术条款 | (DTU 44.1 - Building works - Sealing joint front by implementation of sealants - Part 1 : technical clauses.) |
| NF P85-210-2-2002 | DTU 44.1.建筑工程.个人合同.使用密封剂的密封接头面.第2部分:特殊条款 | (DTU 44.1 - Building works - Private contracts - Sealing joint front by implementation of sealants - Part 2 : special clauses.) |
| NF R12-636-1998 | 道路车辆.液压制动系统.导管、螺纹孔、外螺纹接头和软管管端接头 | (Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.) |
| NF R13-439-1998 | 道路车辆.电子线路板的成组配线装置.第1部分:单极联接接头标记.尺寸与特殊要求 | (Road vehicules. Connections for on-board electrical wiring harnesses. Part 1 : tabs for single-pole connections. Dimensions and specific requirements.) |
| NF R13-702-1984 | 道路车辆.报警插头.接头.机械特性 | (ROAD VEHICLES. DIAGNOSTIC PLUG. CONNECTOR. MECHANICAL CHARACTERISTICS.) |
| NF R16-207-1955 | 平圆柱形接头软管 | (FLEXIBLE PIPES WITH SMOOTH CYLINDRICAL ENDS.) |
| NF R16-208-1955 | 不对称接头软管 | (FLEXIBLE PIPES WITH ASYMMETRICAL ENDS.) |
| NF R16-307-1988 | 小量操纵球形接头 | (ROAD VEHICLES. KNUCKLE JOINTS FOR SMALLE CONTROLS. DIMENSIONAL CHARACTERISTICS.) |
| NF R16-326-1986 | 道路车辆.空气滤清器接头.A型和B型.尺寸 | (ROAD VEHICLES. AIR FILTER CONNECTIONS. TYPES A AND B. DIMENSIONS.) |
| NF R95-403-1970 | 双锥套管道接头.连接尺寸 | (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.) |
| NF R95-404-1968 | 锥颈双拼式管道接头 | (PIPE FITTINGS IN TWO PARTS WITH TAPERED BEARING.) |
| NF R95-405-1970 | 双锥套管道接头.插入件 | (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. INSERTS.) |
| NF R95-406-1975 | 能量储备制动系统.螺旋连接接头和弹性垫圈 | (ENERGY RESERVE BRAKE SYSTEMS. COUPLINGS WITH THREAD-CONNECTIONS AND FLEXIBLE GASKETS.) |
| NF R99-021-1953 | 柔性接头垫圈 | (RINGS FOR FLEXIBLE JOINTS.) |
| NF S61-704-1966 | 消防设备.压力输送用40和65mm自动关闭对称半接头 | (FIRE FIGHTING EQUIPMENT. SELF-SEALING SYMMETRICAL HALF COUPLINGS,SIZES 40 AND 65.) |
| NF S61-705-1966 | 消防设备.AR型100mm自动关闭对称半接头 | (FIRE FIGHTING EQUIPMENT. SELF-SEALING SYMMETRICAL HALF COUPLINGS,SIZE 100. TYPE AR.) |
| NF S61-706-1966 | 消防设备.GUILLEMIN型自动关闭对称接头半壳体或制动片的定位 | (FIRE FIGHTING EQUIPMENT. POSITIONING OF THE LUGS OR JAWS ON GUILLEMIN-TYPE AND SELF-SEALING SYMMETRICAL COUPLINGS.) |
| NF S61-707-1973 | 消防设备.名义直径300救火通风用半接头 | (FIRE FIGHTING EQUIPMENT. VENTILATION. TYPE SEMI-COUPLINGS FOR FIRE USE : DN 300.) |
| NF S76-024-1-2000 | 呼吸保护装置.气瓶阀.插入式连接器用螺纹接头 | (Respiratory protective devices - Gas cylinder valves - Part 1 : thread connections for insert connector.) |
| NF S76-024-2-1999 | 呼吸保护装置.气瓶阀.插座接头 | (RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. PART 2 : OUTLET CONNECTIONS. (EUROPEAN STANDARD EN 144-2).) |
| NF S90-110-1996 | 便携式气瓶.医用指针指示马蹄型阀门排出口接头 | (Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use.) |
| NF S90-425-1989 | 外科植入物.矫形外科用的附件接头.一般规范 | (IMPLANTS FOR SURGERY. STAPLES WITH PARALLEL LEGS FOR ORTHOPAEDIC USE. GENERAL REQUIREMENTS.) |
| NF S91-313-1997 | 牙科设备.给排水管接头 | (Dental equipment. Connections for supply and waste lines.) |
| NF T47-301-1972 | 橡胶.管道接头用压制和模制合成橡胶垫圈和型材.材料的一般特性 | (RUBBER MOLDED AND EXTRUDED SEALING RINGS AND PROFILES FOR PIPE WORK. GENERAL SPECIFICATIONS OF MATERIALS.) |
| NF T47-305-1-1996 | 弹性密封.排水设施用管接头密封用材料的要求.第1部分:硫化橡胶 | (Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications. Part 1 : vulcanized rubber.) |
| NF T47-305-2-2000 | 弹性密封件.水和排水设施用管接头密封件材料的要求.第2部分:热塑性弹性材料 | (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers.) |
| NF T47-305-3-2000 | 弹性密封件.水和排水设施用管接头密封件材料的要求.第3部分:硫化橡胶泡沫材料 | (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3 : cellular material of vulcanized rubber.) |
| NF T47-305-4-2000 | 弹性密封件.水和排水设施用管接头密封件材料的要求.第4部分:铸造聚氨基甲酸乙酯密封元件 | (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements.) |
| NF T54-012-1995 | 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法 | (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).) |
| NF T54-029-1981 | 塑料.未增塑聚氯乙烯模制接头.压力系列.规范 | (Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.) |
| NF T54-037-1981 | 塑料.未增塑聚氯乙烯管道元件.生活污水无压排放设备用密封圈接头.使 用特性 | (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF T54-038-1981 | 装配有压力管用密封圈的未增塑聚氯乙烯管和接头.尺寸特性 | (Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Dimensional caracteristics.) |
| NF T54-039-1988 | 塑料.未增塑聚氯乙烯压力管用密封圈的固定接头.使用特性.规范 | (Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.) |
| NF T54-041-1994 | 塑料管道系统.压力管道用弹性密封圈型接头的热注塑料配件.耐无轴向力短暂内压力性能的试验方法 | (Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.) |
| NF T54-042-1994 | 塑料管道系统.压力管道用溶剂-水泥胶合接头的注模承窝配件 | (Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.) |
| NF T54-044-1978 | 塑料.聚乙烯管与接头.按标定密度和热融流动指数命名的聚乙烯的名称 | (POLYETHYLENE (PE) PIPES AND FITTINGS. DESIGNATION OF POLYETHYLENE BASED ON NOMINAL DENSITY AND MELT FLOW INDEX.) |
| NF T54-051-1979 | 聚乙烯管道.机械接头的载荷减小.试验方法与规 | (Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.) |
| NF T54-052-2001 | 人类饮用水输送用塑料管道系统.迁移评定.塑料管和配件及其接头迁移值的测定 | (Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.) |
| NF T54-090-1976 | 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接头颜色 | (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.) |
| NF T54-095-1985 | 塑料.未增塑聚氯乙烯管件接头粘合溶剂.使用特性 | (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.) |
| NF T54-905-2002 | 塑料管道系统.热塑性压力管用端部承载或非端部承载组件和接头.内部水压下长期无漏损的试验方法 | (Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.) |
| NF T54-906-1996 | 塑料管道系统.埋置非压管道设备用热塑管道系统.弹性密封环型接头耐泄漏性试验方法 | (Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints.) |
| NF T54-923-2000 | 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下密封试验法 | (Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.) |
| NF T54-926-2000 | 热塑性管道系统.地下常压排污设施用接头.用密封压力评定法测定带热塑性弹性体(TPE)密封件接头的长期密封性 | (Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the) |
| NF T54-937-2000 | 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验法 | (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang) |
| NF T57-214-5-1996 | 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性 | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.) |
| NF T57-215-1996 | 塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法 | (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| NF T57-224-1997 | 塑料管道系统.玻璃纤维增强热固性塑料(GRP)构件.检验带有弹性密封件的刚性锁定的管套筒接头设计的试验方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.) |
| NF T57-225-1997 | 塑料管道系统.玻璃纤维增强热固性塑料元件.验证胶合管套筒接头设计的测试方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.) |
| NF T76-119-2003 | 胶粘剂.非结构应用中的木材胶粘剂.搭接接头的抗拉伸剪切强度的测定 | (Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints.) |
| NF T81-101-1975 | 液态化学制品和带1６型旋转同步额定压力的烃类对称半接头(吉尔曼体系)(ＧＵＩＬＬＥＭＩＮ)的运输和装卸 | (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS AND HYDROCARBONS-HALF SYMETRIC COUPLING(GUILLEMIN SYSTEM)WITH ROTATING LOCK-NOMINALPRESSURE 16.) |
| NF T81-106-1976 | 喷雾状产品的运输.最大压力２．５bar气动排空的道路罐车.接头 | (TRANSPORTATION OF POWDERY PRODUCTS. ROAD TANKERS WITH PNEUMATIC DISCHARGE UNDER MAXIMUM PRESSURE 2.5 BAR. COUPLING.) |
| NF T81-125-1987 | 冷冻液化气容器.沉淀分离器.Ｎ2 Ｏ或冷冻液ＣＯ2 的接头 | (REFRIGERATED LIQUEFIED GAS CONTAINERS. TRANSFER DEVICES. COUPLINGS FOR REFRIGERATED N2O OR CO2.) |
| NF T81-126-1987 | 冷冻液化气容器.沉淀分离器.冷冻液态氧或氮的ＤＮ４０接头 | (REFRIGERATED LIQUEFIED GAS CONTAINERS. TRANSFER DEVICES. DN 40 COUPLINGS FOR REFRIGERATED O2 OR N2.) |
| NF U14-406-1992 | 农业拖拉机和机械.通用快速动作液压接头 | (Agricultural trators and machinery. General purpose quick-action hydraulic couplers.) |
| NF Z85-506-1-2002 | 模拟和综合业务数字网(ISDN)用户线路的电路试验用局域交换Q3接口.第1部分:Q3接头规范 | (Q3 interface exchange at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) suscriber lines - Part 1 : Q3 interface specification.) |
| XP P98-090-1999 | 与膨胀节有关的试验.沥青插塞接头的永久变形.轮辙试验 | (Tests relating to expansion joints - Asphalt plug joint permanent deformation - Wheel tracking test.) |
| 编号 | 中文名称 | 英文名称 |