| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 61073-1-2009 | 纤维光学互连器件和无源元件.光学纤维和光缆用机械接头和熔融接头保护器.第1部分:通用规范 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| IEC 61076-3-114-2009 | 电子设备用连接器.产品要求.第3-114部分:矩形连接器.合并IEC 60603-7系列接口的工业环境用频带在600MHz以下 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specifications for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| IEC 61188-5-8-2007 | 印制板和印制板组件.设计和使用.第5-8部分:附件(结合区/接头)考虑要素.区域阵列组件(BGA, FBGA, CGA, LGA) | Printed boards and printed board assemblies - Design and use - Part 5-8: Attachment (land/joint) considerations - Area array components (BGA, FBGA, CGA, LGA) |
| IEC 62275-2006 | 电缆管理系统.电器设备用电缆接头 | Cable management systems - Cable ties for electrical installations |
| ISO 10042 Technical Corrigendum 1-2006 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级.技术勘误1 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections; Technical Corrigendum 1 |
| ISO 10042-2005 | 焊接 铝和铝合金的弧焊接头 缺陷质量分级指南 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| ISO 1022-1988 | 航空航天 流体系统用气态氧充气接头(旧型) 尺寸(英制系列) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (old type); dimensions (inch series) |
| ISO 10321-2008 | 土工织物.用宽条法对接头/接缝处的拉伸试验 | Geosynthetics - Tensile test for joints/seams by wide-width strip method |
| ISO 1034-1973 | 航空器 地面空气调节连接接头 | Aircraft; Ground air-conditioning connections |
| ISO 10955-1999 | 航空航天 航空器操纵钢丝绳用末端接头和松紧套筒 技术规范 | Aerospace - End-fittings and turnbarrels for aircraft control wire rope - Technical specification |
| ISO 10983-1999 | 木结构 实心木材指型接头 生产要求 | Timber structures - Solid timber finger-jointing - Production requirements |
| ISO 11-1987 | 航空器 压力座舱的地面压力试验连接接头 | Aircraft; Ground pressure testing connections for pressure cabins |
| ISO 11144-1995 | 牙科设备 供水及排水管接头 | Dental equipment - Connections for supply and waste lines |
| ISO 1167-1-2006 | 流体传输用热塑管、接头和组件.抗内压力的测定.第1部分:通用方法 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method |
| ISO 1167-2-2006 | 流体传输用热塑管、接头和组件.抗内压力的测定.第2部分:管试件的准备 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces |
| ISO 12118-1995 | 航空货运设备 全向额定承载能力等于或高于22250N(50001bf)的双螺柱系留接头的识别标志 | Air cargo equipment - Identification of double-stud tie-down fittings having an omnidirectional rated load capacity of 22250 N (5000 lbf) or above |
| ISO 12151-1-1999 | 液压传动和通用联接件 软管接头 第1部分:带ISO 8434-3 O形圈端面密封末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 12151-2-2003 | 液压传动和通用联接件.软管接头.第2部分:带ISO 8434-1 O形圈24锥形末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings |
| ISO 12151-3-1999 | 液压传动和通用联接件 软管接头 第3部分:带ISO6162法兰末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends |
| ISO 12151-4-2007 | 用于液压流体传动和一般用途的接头.软管配件.第4部分:带ISO 6149米制螺柱头的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Part 4: Hose fittings with ISO 6149 metric stud ends |
| ISO 12151-5-2007 | 用于液压流体传动和一般用途的接头.软管配件.第5部分:带ISO 8434-2 37°扩口端的软管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with ISO 8434-2 37° flared ends |
| ISO 13486-1-1999 | 道路车辆 液压制动系统 第1部分:双喇叭口管、螺纹孔、阳螺纹管接头和管座 | Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
| ISO 13919-1-1996 | 焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分:钢 | Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel |
| ISO 13919-2-2001 | 焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分：铝及其可焊合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys |
| ISO 13950 Technical Corrigendum 1-2008 | 塑料管和配件.电熔焊接头的自动识别系统.技术勘误1 | Plastics pipes and fittings - Automatic recognition systems for electrofusion joints; Technical Corrigendum 1 |
| ISO 13950-2007 | 塑料管和配件.电熔焊接头的自动识别系统 | Plastics pipes and fittings - Automatic recognition systems for electrofusion joints |
| ISO 13953-2001 | 聚乙烯管材和管件 拉申强度的测定和熔接对接接头试件的失效模型 | Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint |
| ISO 14615-1997 | 粘合剂 结构型粘合剂粘结接头的耐久性 荷载下暴露在湿度和温度之中 | Adhesives - Durability of structural adhesive joints - Exposure to humidity and temperature under load |
| ISO 1465-1989 | 航空器 液态氧充填接头 相配尺寸 | Aircraft; liquid oxygen replenishment couplings; mating dimensions |
| ISO 15171-1-1999 | 用于流体传动和一般用途的管接头 诊断用液压管接头 第1部分:非压力下连接的管接头 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure |
| ISO 15171-2-2000 | 用于流体传动和一般用途的管接头 诊断用液压管接头 第2部分:带M16×2螺纹端的压力连接接头 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 × 2 end for connection under pressure |
| ISO 15236-4-2004 | 钢丝传送带.第4部分:硫化带接头 | Steel cord conveyor belts - Part 4: Vulcanized belt joints |
| ISO 15407-1-2000 | 气压传动 五气口方向控制阀、规格18mm和26mm 第1部分:不带电接头的安装面 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector |
| ISO 15509-2001 | 粘合剂 工程塑料接头粘合强度的测定 | Adhesives - Determination of the bond strength of engineering-plastic joints |
| ISO 15614-8-2002 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第8部分:管对管板接头焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints |
| ISO 15615-2002 | 气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices |
| ISO 15835-1-2009 | 混凝土增强钢.棒材制机械接头用增强耦合器.第1部分:要求 | Steels for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars - Part 1: Requirements |
| ISO 15835-2-2009 | 混凝土加固用钢.棒材机械接头用加固连接件.第2部分:试验方法 | Steels for the reinforcement of concrete - Reinforcement couplers for mechanical splices of bars - Part 2: Test methods |
| ISO 16028 AMD 1-2006 | 液压传动.在20MPa(200巴)至31.5MPa(315巴)压力下使用的平面对接型快速接头.规范.修改件1 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications; Amendment 1 |
| ISO 16028-1999 | 液压传动 用于压力为20 MPa(200 bar)～31.5 MPa(315 bar)的平面对接型快速接头 规范 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications |
| ISO 16070-2005 | 石油和天然气工业.下井设备.锁芯轴和落地接头 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples |
| ISO 16422-2006 | 由定向未增塑聚(氯)乙烯(PVC-O)制成的用于压力下水运输的管道和接头.规范 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure - Specifications |
| ISO 16670-2003 | 木结构.机械紧固件接头.准静态逆循环试验方法 | Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method |
| ISO 17636-2003 | 焊缝的无损检验.熔焊接头的放射检验 | Non-destructive testing of welds - Radiographic testing of fusion-welded joints |
| ISO 17637-2003 | 焊缝的无损检验.熔焊接头的外观检验 | Non-destructive testing of welds - Visual testing of fusion-welded joints |
| ISO 17640-2005 | 焊接的无损检验.焊接接头的超声波检验 | Non-destructive testing of welds - Ultrasonic testing of welded joints |
| ISO 17653-2003 | 金属材料接头的破坏检验.电阻点焊的扭转试验 | Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
| ISO 17659-2002 | 焊接.图示焊接接头的多语种术语 | Welding - Multilingual terms for welded joints with illustrations |
| ISO 1813-1998 | 带传动 多楔带、有接头V带、宽截面带及六角带 抗静电带的电导率:特性和试验方法 | Belt drives - V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts - Electrical conductivity of antistatic belts: Characteristics and methods of test |
| ISO 18279-2003 | 钎焊.钎焊接头的缺陷 | Brazing - Imperfections in brazed joints |
| ISO 18672-1-2009 | 塑料无压埋地排水管管道系统.聚酯混凝土(PRC).第1部分:连接管子和配件的柔性接头. | Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Part 1: Pipes and fittings with flexible joints |
| ISO 1966-1973 | 航空器电缆的压接接头 | Crimped joints for aircraft electrical cables |
| ISO 2016-1981 | 铜管用毛细管焊接接头 组装尺寸和试验方法 | Capillary solder fittings for copper tubes; Assembly dimensions and tests |
| ISO 2048-1990 | 弹性密封圈型接头的硬聚氯乙烯(PVC-U)压力管的双承口 最小配合深度 | Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints; minimum depths of engagement |
| ISO 21004-2006 | 塑料管道系统.供水用基于热塑性塑料的多层管道及其接头 | Plastics piping systems - Multilayer pipes and their joints, based on thermoplastics, for water supply |
| ISO 21809-3-2008 | 石油和天然气工业.管道运输系统用掩埋于地下或淹没于水下的管道外部覆层.第2部分:安装接头涂层 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings |
| ISO 22826-2005 | 金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验) | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| ISO 23711-2003 | 弹性密封件.灌溉和排水设施用管接头密封件材料的要求.弹性塑料 | Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers |
| ISO 2531-1998 | 输水和输气用球墨铸铁管、配件、附件及其接头 | Ductile iron pipes, fittings, accessories and their joints for water or gas applications |
| ISO 2553-1992 | 焊接、硬钎焊和软钎焊接头 图样上的符号表示法 | Welded, brazed and soldered joints; symbolic representation on drawings |
| ISO 2974-2005 | 柴油机.60度锥孔的高压油管接头管端部连接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 degrees female cone |
| ISO 3174-1994 | 航空器 用地面设备检查液压系统的连接接头 螺纹式 | Aircraft - Connections for checking hydraulic systems by ground appliances - Threaded type |
| ISO 3253-1998 | 气焊设备 焊接、切割和有关工艺设备的软管接头 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| ISO 3458-1976 | 聚乙烯(PE)压力管材和管件间的装配接头 内压密封试验 | Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure |
| ISO 3459-1976 | 聚乙烯(PE)压力管 用机械式管件装配的接头 内压试验法和要求 | Polyethylene (PE) pressure pipes; Joints assembled with mechanical fittings; Internal under-pressure test method and requirement |
| ISO 3460-1975 | 硬聚氯乙烯(PVC)压力管材 公制系列 凹法兰管接头尺寸 | Unplasticized polyvinyl chloride (PVC) pressures pipes; Metric series; Dimensions of adapter for backing flange |
| ISO 3501-1976 | 聚乙烯(PE)压力管材和管件间的装配接头 抗拉拔试验 | Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of resistance to pull out |
| ISO 3503-1976 | 聚乙烯(PE)压力管材和管件间的装配接头 弯曲时承受内压的密封试验 | Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending |
| ISO 3553-1-1987 | 道路车辆 点火线圈和分电器的高压接头 第1部分:插座型 | Road vehicles; High-tension connections for ignition coils and distributors; Part 1 : Socket-type |
| ISO 3553-2-1997 | 道路车辆 点火线圈和分电器的高压接头 第2部分:插头型 | Road vehicles - High-tension connectors for ignition coils and distributors - Part 2: Plug-types |
| ISO 3926-1980 | 造船 内河航行 滑油和燃料输入管接头、配合尺寸 | Shipbuilding; Inland navigation; Couplings for oil and fuel reception; Mating dimensions |
| ISO 4038-1996 | 道路车辆 液压制动系统 单喇叭口管、螺孔和阳螺纹接头和软管管端接头 | Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings |
| ISO 4039-1-1998 | 道路车辆 气压制动系统 第1部分:有平面密封面的管、阳螺纹管接头和螺纹孔 | Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface |
| ISO 4039-2-1998 | 道路车辆 气压制动系统 第2部分:有锥形密封面的管、阳螺纹管接头和螺纹孔 | Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface |
| ISO 4132-1979 | 承压管用硬聚氯乙烯(PVC)和金属的接头管件安装长度和螺纹尺寸 公制系列 | Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure; Laying lengths and size of threads; Metric series |
| ISO 4347-2004 | 板式链、端接头及槽轮.尺寸、计量力和抗拉强度 | Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths |
| ISO 4397-1993 | 流体传动系统和元件 管接头及其附件 硬管外径和软管内径 | Fluid power systems and components; connectors and associated components; nominal outside diameters of tubes and nominal inside diameters of hoses |
| ISO 4399-1995 | 流体传动系统和元件 管接头及其附件 公称压力系列 | Fluid power systems and components - Connectors and associated components - Nominal pressures |
| ISO 4434-1977 | 承压管用硬聚氯乙烯(PVC)接头管件 安装长度和螺纹尺寸 公制系列 | Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure; Laying length and size of threads; Metric series |
| ISO 45-1990 | 航空器 压力加油接头 | Aircraft; pressure refuelling connections |
| ISO 451-1976 | 飞机.压力加注润滑油接头 | Aircraft; Pressure re-oiling connection |
| ISO 485-1973 | 航空器的水-甲醇压力加注接头 | Aircraft water-methanol pressure connections |
| ISO 49 Technical Corrigendum 1-1997 | 符合ISO 7-1可锻铸铁管螺纹接头 技术勘误1 | Malleable cast iron fittings threaded to ISO 7-1; Technical Corrigendum 1 |
| ISO 49-1994 | 符合ISO 7-1可锻铸铁管螺纹接头 | Malleable cast iron fittings threaded to ISO 7-1 |
| ISO 5031-1977 | 松散物料连续搬运设备 气力输送用接头和软管 安全规则 | Continuous mechanical handling equipment for loose bulk materials; Couplings and hose components used in pneumatic handling; Safety code |
| ISO 5178-2001 | 金属材料焊接的破坏性试验 熔焊接头的焊接金属的纵向拉申试验 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| ISO 5183-1-1998 | 电阻焊设备 外锥度1:10电极接头 第10部分:锥度1:10圆锥形接头 | Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 |
| ISO 5183-2-2000 | 电阻点焊 外锥度1:10电极接头 第2部分:端推力电极用平行柄接头 | Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes |
| ISO 5187-1985 | 焊接和相关工艺 用软钎焊和硬钎焊接头 力学试验方法 | Welding and allied processes; Assemblies made with soft solders and brazing filler metals; Mechanical test methods |
| ISO 5290-2001 | 带传动 带接头的窄V带槽轮 槽形截面为9N/J、15N/J和25N/J(有效系列) | Belt drives - Grooved pulleys for narrow V-belts - Groove sections 9N/J, 15N/J and 25N/J (effective system) |
| ISO 5291-1993 | 带传动 带接头的三角V带槽轮 槽形截面为AJ、BJ、CJ和DJ(有效系列) | Belt drives; grooved pulleys for joined classical V-belts; groove sections AJ, BJ, CJ and DJ (effective system) |
| ISO 5356-1-2004 | 麻醉和呼吸设备.锥形接头.第1部分:锥体和锥套 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets |
| ISO 5356-2-2006 | 麻醉和呼吸设备.圆锥形接头.第2部分:螺纹承重接头 | Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors |
| ISO 5366-1-2000 | 麻醉和呼吸设备 气管造口插管 第1部分:成人用插管和接头 | Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults |
| ISO 5599-1-2001 | 气压传动 五气口方向控制阀 第1部分:不带电接头的安装面 | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector |
| ISO 5599-2 AMD 1-2004 | 气压传动.五气口方向控制阀.第2部分:带可选电接头的安装面.修改件1 | Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector; Amendment 1 |
| ISO 5599-2-2001 | 气压传动 五气口方向控制阀 第2部分:带可选电接头的安装面 | Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector |
| ISO 5620-1-1992 | 造船及海上结构物 饮水舱的注水接头 第1部分:一般要求 | Shipbuilding and marine structures; filling connection for drinking water tanks; part 1: general requirements |
| ISO 5620-2-1992 | 造船及海上结构物 饮水舱的注水接头 第2部分:零件 | Shipbuilding and marine structures; filling connection for drinking water tanks; part 2: components |
| ISO 5675-2008 | 农业拖拉机和机械.一般用快速液压接头 | Agricultural tractors and machinery - General purpose quick-action hydraulic couplers |
| ISO 5676-1983 | 农林用拖拉机和机械 液压接头 制动回路 | Tractors and machinery for agriculture and forestry; Hydraulic coupling; Braking circuit |
| ISO 5817-2003 | 焊接.钢、镍、钛及其合金熔焊接头(束焊除外).缺陷的质量分级 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections |
| ISO 5821-2009 | 电阻焊接.点焊电极帽接头 | Resistance welding - Spot welding electrode caps |
| ISO 5828-2001 | 电阻焊设备 连接水冷接头的二次连接电缆 尺寸及特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics |
| ISO 5829-1984 | 电阻点焊 内锥度为1:10的电极接头 | Resistance spot welding; Electrode adaptors, female taper 1 : 10 |
| ISO 5855-3-1999 | 航空航天 MJ螺纹 第3部分:液体系统管接头螺纹系统的极限尺寸 | Aerospace - MJ threads - Part 3: Limit dimensions for fittings for fluid systems |
| ISO 5866-1983 | 航空器 有扁接头的2型和3A型插座式的换向继电器 间隙和固定尺寸 | Aircraft; 2 and 3A plug-in base change-over relays, Type II, with crimped connections; Clearance and fixing dimensions |
| ISO 5887-1981 | 航空器 乘务员用调压面罩与氧气源的连接接头 | Aircraft; Joints for connecting crew members' regulator masks to oxygen sources |
| ISO 594-1-1986 | 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头 第1部分:一般要求 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment; Part 1 : General requirements |
| ISO 594-2-1998 | 注射器、针头及其他医疗器械为6%(鲁尔)的锥形接头 第2部分:锁紧接头 | Conical fittings with 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 2: Lock fittings |
| ISO 6038-1993 | 电影 70mm、65mm、35mm和16mm电影影片接头 尺寸和位置 | Cinematography; splices for use on 70 mm, 65 mm, 35 mm and 16 mm motion-picture films; dimensions and locations |
| ISO 610-1990 | 刮板输送机和刨煤机用高强度钢链带(无接头无形连接) | High-tensile steel chains (round link) for chain conveyors and coal ploughs |
| ISO 6149-1-2006 | 用于液压流体传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第1部分:带锪孔沟槽中装有 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal |
| ISO 6149-2-2006 | 用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第2部分:重型(S系列)螺柱端头 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| ISO 6149-3-2006 | 用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第3部分:轻型(L系列)螺柱端头 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 6149-4-2006 | 用于传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第4部分:内外六角气门栓的尺寸、设 | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| ISO 6150-1988 | 气压传动 最高工作压力为10 bar、16 bar和25 bar(1 MPa、1.6 MPa和2.5 MPa)圆柱形快换接头、插头、连接尺寸 | Pneumatic fluid power; cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 MPa and 2,5 MPa); plug connecting dimensions, specifications, application guidelines and testing |
| ISO 6455-1983 | 承压管用带弹性密封圈型接头的硬聚氯乙烯(PVC)管件 安装长度的测定 公制系列 | Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series |
| ISO 6696-1989 | 自行车 用于中接头装配的螺纹 | Cycles; screw threads used in bottom bracket assemblies |
| ISO 6699-1990 | 自行车 把横管和把立管接头 装配尺寸 | Cycles; stem and handlebar bend; assembly dimensions |
| ISO 6772-1988 | 航空航天 流体系统 液压软管、导管和接头组件的冲击试验 | Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 6891-1983 | 木结构 机械紧固件接头 强度和变形特性确定的一般原则 | Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics |
| ISO 7169-2007 | 航空航天.液压系统用24°锥形的、压力范围截至3000psi或21000kPa的可拆卸管接头.采购规范(英制/米制) | Aerospace - Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3000 psi or 21000 kPa - Procurement specification, inch/metric |
| ISO 7241-1-1987 | 液压传动 快换接头 第1部分:尺寸和要求 | Hydraulic fluid power; Quick-action couplings; Part 1 : Dimensions and requirements |
| ISO 7241-2-2000 | 液压传动 快换接头 第2部分:试验方法 | Hydraulic fluid power - Quick-action couplings - Part 2: Test methods |
| ISO 7257-1983 | 航空器 液压管接头和连接接头扭转弯曲试验 | Aircraft; Hydraulic tubing joints and fittings; Rotary flexure test |
| ISO 7289-1996 | 气焊、切割及相关工艺用带关闭阀的快速接头 | Quick-action couplings with shut-off valves for gas welding, cutting and allied processes |
| ISO 7319-1992 | 航空航天.流体系统.24°锥孔米制管接头的接口 | Aerospace; fluid systems; interface of 24° cone metric couplings |
| ISO 7320-1992 | 航空航天 流体系统螺纹密封连接接头 尺寸 | Aerospace; couplings, threaded and sealed, for fluid systems; dimensions |
| ISO 7803-1987 | 商用道路车辆 转向球接头 | Commercial road vehicles; Steering ball joints |
| ISO 7876-4-2004 | 燃油喷射装置.词汇.第4部分:高压管和末端接头 | Fuel injection equipment - Vocabulary - Part 4: High-pressure pipes and end-connections |
| ISO 8056-4-1987 | 航空器 镍铬和镍铝热电偶的延伸电缆 第4部分:压接式对接接头 尺寸 | Aircraft; Nickel-chromium and nickel-aluminium thermocouple extension cables; Part 4 : Crimp-type butt connectors; Dimensions |
| ISO 8092-1-1996 | 道路车辆 车载电气线束的连接 第1部分:单极联接接头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections; dimensions and specific requirements |
| ISO 8092-3-1996 | 道路车辆 车载电气线束的连接 第3部分:多极连接接头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections; dimensions and specific requirements |
| ISO 8267-1-2005 | 飞行器.牵引杆附属接头的接口要求.第1部分:干线飞行器 | Aircraft - Tow bar attachment fittings interface requirements - Part 1: Main line aircraft |
| ISO 8267-2-2005 | 飞行器.牵引杆附属接头的接口要求.第2部分:地方飞行器 | Aircraft - Tow bar attachment fittings interface requirements - Part 2: Regional aircraft |
| ISO 8434-1-2007 | 液压传动和通用金属管连接件.第1部分:24°锥形接头 | Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors |
| ISO 8434-2-2007 | 液压传动和通用金属管连接件.第2部分:37°扩口管接头 | Metallic tube connections for fluid power and general use - Part 2: 37° flared connectors |
| ISO 8434-3-2005 | 用于流体传动和一般用途的金属管接头.第3部分:O形圈端面密封管接头 | Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors |
| ISO 8483-2003 | 玻璃增强热固性塑料管及配件.栓结法兰接头设计验证的试验方法 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints |
| ISO 8533-2003 | 玻璃增强热固性塑料管及配件.胶合接头或包好的接头设计验证的试验方法 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints |
| ISO 8775-1988 | 航空航天 流体系统用气氧充填接头(新型) 尺寸(英制) | Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series) |
| ISO 8793-1986 | 钢丝绳 套圈卡紧环眼接头 | Steel wire ropes; Ferrule-secured eye terminations |
| ISO 8795-2001 | 输送人类生活用水用塑料管道系统 流动评定 塑料管道和管件及其接头的流动值的测定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints |
| ISO 8820-3-2002 | 道路车辆.熔断体.第3部分:带接头的熔断体(刀闸) | Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) |
| ISO 8969-1990 | 木结构 单侧冲孔金属板紧固件和接头的试验 | Timber structures; testing of unilateral punched metal plate fasteners and joints |
| ISO 8970-1989 | 木结构 机械紧固件接头的试验 对木材密度要求 | Timber structures; testing of joints made with mechanical fasteners; requirements for wood density |
| ISO 9015-1-2001 | 金属材料焊接的破坏性试验 硬度试验 第1部分：弧焊接头的硬度试验 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| ISO 9538-1996 | 航空航天 液压管路安装接头及管接头 平面弯曲试验 | Aerospace - Hydraulic tubing joints and fittings - Planar flexure test |
| ISO 9623-1997 | 压力流体用聚乙烯(PE)/金属和聚丙烯(PP)/金属接头管件 螺纹的设计长度和尺寸 公制系列 | PE/metal and PP/metal adaptor fittings for pipes for fluids under pressure - Design lengths and size of threads - Metric series |
| ISO 9624-1997 | 压力流体用热塑性塑料管材 法兰接头和活套法兰的适配尺寸 | Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose backing flanges |
| ISO 9691-1992 | 橡胶 管接头的密封件制造工艺的建议 缺陷类型和描述 | Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections |
| ISO 9692-2-1998 | 焊接和相关工艺 接头的制备 第2部分:钢的埋弧焊 | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels |
| ISO 9692-3-2000 | 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 9692-4-2003 | 焊接和相关工艺.接头制备的建议.第4部分:包钢 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels |
| ISO 9788-1990 | 航空货运设备 固定航空货物用承载能力为22250N(5000lbf)双螺柱接头的铸件 | Air cargo equipment; cast components of double stud fitting assembly with a load capacity of 22250 N (5000 lbf), for aircraft cargo restraint |
| ISO 9939-1994 | 航空航天 滑油的压力加油接头(新型) | Aerospace; pressure re-oiling connection (new type) |
| ISO/TR 5987-1984 | 内河航行 喷水灭火系统 灭火水龙带连接头 一般技术要求 | Inland navigation; Water fire-fighting system; Couplings of fire hoses; General technical requirements |
| 编号 | 中文名称 | 英文名称 |