| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DL/T 542-1994(2005) | 钢熔化焊T形接头角焊缝超声波检验方法和质量分级 | () |
| DL/T 820-2002 | 管道焊接接头超声波检验技术规程 | () |
| DL/T 821-2002 | 钢制承压管道对接焊接接头射线检验技术规范 | () |
| GB/T 10752-2005 | 船用钢管对焊接头 | Marine steel butt-welding fittings |
| GB/T 11265-1989 | 轻轨用接头夹板 | Fish plates for light rails |
| GB/T 11363-2008 | 钎焊接头强度试验办法 | Test method of the strength for brazed and soldered joint |
| GB/T 11618.1-2008 | 铜管接头 第1部分:钎焊式管件 | () |
| GB/T 11618.2-2008 | 铜管接头.第2部分:卡压式管件 | Pipe fittings of copper and copper alloys.Part 2:Fittings of press type |
| GB/T 12465-2007 | 管路补偿接头 | Piping compensatory couplings |
| GB/T 12605-2008 | 无损检测.金属管道熔化焊环向对接接头射线照相检测方法 | Non-destructive testing.Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes |
| GB/T 12736-2009 | 输送带 机械接头强度的测定 静态试验方法 | () |
| GB/T 14137-1993 | 光纤机械式固定接头插入损耗测试方法 | Optical fiber mechanical-type splice insertion loss test |
| GB/T 14149-1993 | 实验室玻璃仪器 互换球形磨砂接头 | Laboratory glassware--Interchangeable spherial ground joints |
| GB/T 14171-1993 | 气制动管路螺纹孔和管接头外螺纹 | Motor vehicles--Pneumatic braking systems--Tapped holes and male fittings |
| GB/T 14514.1-1993 | 气动管接头试验方法 | Pneumatic fluid power. Tube fittings. Test methods |
| GB/T 15830-2008 | 无损检测.钢制管道环向焊缝对接接头超声检测方法 | Non-destructive testing.Practice for ultrasonic testing of circumferential butt welds in steel pipes and tubes |
| GB/T 16529-1996 | 光纤光缆接头 第1部分;总规范 构件和配件 | Splices for optical fibres and cables. Part 1: Generic specification--Hardware and accessories |
| GB/T 16529.2-1997 | 光纤光缆接头 第2部分;分规范 光纤光缆接头盒和集纤盘 | Splices for optical fibres and cables. Part 2: Sectional specification. Splice organizers and closures for optical fibres and cables |
| GB/T 16529.3-1997 | 光纤光缆接头 第3部分;分规范 光纤光缆熔接式接头 | Splices for optical fibres and cables. Part 3: Sectional specification. Fusion splices for optical fibres and cables |
| GB/T 16529.4-1997 | 光纤光缆接头 第4部分;分规范 光纤光缆机械式接头 | Splices for optical fibres and cables. Part 4: Sectional specification. Mechanical splices for optical fibres and cables |
| GB/T 16693-1996 | 软管快速接头 | Quick hose's connection |
| GB/T 16957-1997 | 复合钢板焊接接头力学性能试验方法 | Mechanical tests on welded joints in clad plates |
| GB/T 16989-1997 | 土工布 接头/接缝宽条拉伸试验方法 | () |
| GB/T 18615-2002 | 波纹金属软管用非合金钢和不锈钢接头 | Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses |
| GB/T 19418-2003 | 钢的弧焊接头 缺陷质量分级指南 | Arc-welded joints in steel-Guidance on quality levels for imperfections |
| GB/T 19471.1-2004 | 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 | Plastics piping systems-Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes-Test method for leaktighness under internal pressure and angular deflection |
| GB/T 19471.2-2004 | 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 | Plastics piping systems-Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes-Test method for leaktightness under negative pressure |
| GB/T 1962.1-2001 | 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分;通用要求 | The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement |
| GB/T 1962.2-2001 | 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第2部分;锁定接头 | Conical fittings with a 6%(Luer)taper for syringes,needles and certain other medical equipment Part 2: Lock fittings |
| GB/T 19674.1-2005 | 液压管接头用螺纹油口和柱端 螺纹油口 | Connections for general use and fluid power Ports and stud ends with thread-Threaded port |
| GB/T 19674.2-2005 | 液压管接头用螺纹油口和柱端 填料密封柱端(A型和E型) | Connections for general use and fluid power Ports and stud ends with thread.Stud ends with elastomeric sealing(A type and type E) |
| GB/T 19674.3-2005 | 液压管接头用螺纹油口和柱端 金属对金属密封柱端(B型) | Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with metal-to-metal sealing(type B) |
| GB/T 19810-2005 | 聚乙烯(PE)管材和管件 热熔对接接头 拉伸强度和破坏形式的测定 | Polyethylene(PE)pipe and fittings.Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| GB/T 2031-1994 | 船用消防接头 | Marine fire-fighting coupeigs |
| GB/T 21297-2007 | 实验室玻璃仪器 互换锥形磨砂接头 | Laboratory glassware-Interchangeable conical ground joint |
| GB/T 21359-2008 | 食品和供水工业用不锈钢螺纹接头 | Stainless steel tube threaded couplings for the food and water industry |
| GB/T 21400.2-2008 | 绞盘式喷灌机.第2部分:软管和接头.试验方法 | Traveller irrigation machines.Part 2:Softwall hose and couplings.Test methods |
| GB/T 21410-2008 | 石油天然气工业.井下工具.锁定心轴和定位接头 | Petroleum and natural gas industries.Downhole equipment.Lock mandrels and landing nipples |
| GB/T 22076-2008 | 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验 | Pneumatic fluid power. Cylindrical quick-action couplings. Plug connecting dimensions, specifications, application guidelines and testing |
| GB/T 22085.1-2008 | 电子束及激光焊接接头.缺欠质量分级指南.第1部分:钢 | Electron and laser beam welded joints-Guidance on quality levels for imperfections-Part 1:Steel |
| GB/T 22085.2-2008 | 电子束及激光焊接接头.缺欠质量分级指南.第2部分:铝及铝合金 | Electron and laser beam welded joints-Guidance on quality levels for imperfection-Part 2:Aluminium and its weldable alloys |
| GB/T 22087-2008 | 铝及铝合金的弧焊接头.缺欠质量分级指南 | Arc-welded joints in aluminium and its alloys.Guidance on quality levels for imperfection |
| GB/T 23682-2009 | 制冷系统和热泵 软管件、隔震管和膨胀接头 要求、设计与安装 | () |
| GB/T 2649-1989 | 焊接接头机械性能试验取样方法 | Methods of sampling for mechanical properties tests of welded joint |
| GB/T 2650-2008 | 焊接接头冲击试验方法 | Impact test methods on welded joints |
| GB/T 2651-2008 | 焊接接头拉伸试验方法 | Tensile test method on welded joints |
| GB/T 2653-2008 | 焊接接头弯曲试验方法 | Bend test methods on welded joints |
| GB/T 2654-2008 | 焊接接头硬度试验方法 | Hardness test methods on welded joints |
| GB/T 3323-2005 | 金属熔化焊焊接接头射线照相 | Radiographic examination of fusion welded joints in metallic materials |
| GB/T 3733-2008 | 卡套式端直通管接头 | 24°cone connectors.Straight thread |
| GB/T 3734-2008 | 卡套式锥螺纹直通管接头 | 24°cone connectors.Male |
| GB/T 3735-2008 | 卡套式端直通长管接头 | 24° cone connectors. Straight thread long |
| GB/T 3736-2008 | 卡套式锥螺纹长管接头 | 24° cone connectors. Male long |
| GB/T 3737-2008 | 卡套式直通管接头 | 24°cone connectors.Union |
| GB/T 3738-2008 | 卡套式可调向端弯通管接头 | 24° cone connectors. Straight thread elbow |
| GB/T 3739-2008 | 卡套式锥螺纹弯通管接头 | 24°cone connectors.Male elbow |
| GB/T 3740-2008 | 卡套式弯通管接头 | 24°cone connectors.Union elbow |
| GB/T 3741-2008 | 卡套式可调向端三通管接头 | 24°cone connectors.Straight thread tee |
| GB/T 3742-2008 | 卡套式锥螺纹三通管接头 | 24°cone connectors.Male tee |
| GB/T 3743-2008 | 卡套式可调向端弯通三通管接头 | 24° cone connectors.Straight thread run tee |
| GB/T 3744-2008 | 卡套式锥螺纹弯通三通管接头 | 24° cone connectors.Male run tee |
| GB/T 3745-2008 | 卡套式三通管接头 | 24° cone connectors.Union tee |
| GB/T 3746-2008 | 卡套式四通管接头 | 24° cone connectors. Union cross |
| GB/T 3747-2008 | 卡套式焊接管接头 | 24° cone connectors.Weld male |
| GB/T 3748-2008 | 卡套式过板直通管接头 | 24° cone connectors.Bulkhead union |
| GB/T 3749-2008 | 卡套式过板弯通管接头 | 24° cone connectors.Bulkhead union elbow |
| GB/T 3750-2008 | 卡套式铰接管接头 | 24°cone connectors.Angle swivel screw connector |
| GB/T 3751-2008 | 卡套式压力表管接头 | 24° cone connectors.Connector for pressure gauge |
| GB/T 3752-2008 | 卡套式组合弯通管接头 | 24°cone connectors.Adjustable elbow |
| GB/T 3753-2008 | 卡套式组合三通管接头 | 24° cone connectors.Adjustable tee |
| GB/T 3754-2008 | 卡套式锥密封组合弯通管接头 | 24° cone connectors.Swivel elbow with O-ring |
| GB/T 3755-2008 | 卡套式锥密封组合三通管接头 | 24°cone connectors.Branch tee with O-ring |
| GB/T 3756-2008 | 卡套式锥密封组合直通管接头 | 24°cone connectors.Swivel stud straight adapter with O-ring with stud end |
| GB/T 3757-2008 | 套式过板焊接管接头 | 24° cone connectors. Weld-in bulkhead straight connector |
| GB/T 3758-2008 | 卡套式管接头用锥密封焊接接管 | 24° cone connectors. Weld-on nipple |
| GB/T 3759-2008 | 卡套式管接头用连接螺母 | 24°cone connectors.Nut |
| GB/T 3760-2008 | 卡套式管接头用锥密封堵头 | 24° cone connectors.Plug with O-ring |
| GB/T 3761-1983 | 卡套式管接头用锥体环 | Bite type tube fittings--Pressure bush for butt joints |
| GB/T 3762-1983 | 卡套式管接头用尖角密封垫圈 | Bite type tube fittings--Tipping washer |
| GB/T 3763-2008 | 管接头用六角薄螺母 | 24°cone connectors and flared couplings.Hexagon thin nut |
| GB/T 3765-2008 | 卡套式管接头技术条件 | 24°cone connectors.Specification |
| GB/T 5107-2008 | 气焊设备 焊接、切割和相关工艺设备用软管接头 | Gas welding equipment.Hose connections for equipment for welding,cutting and allied processes |
| GB/T 5625-2008 | 扩口式直通管接头 | FLared couplings-Straight thread |
| GB/T 5626-2008 | 扩口式锥螺纹直通管接头 | Flared couplings.Male |
| GB/T 5627-2008 | 扩口式锥螺纹长管接头 | Flared couplings.Male long |
| GB/T 5628-2008 | 扩口式直通管接头 | Flared couplings.Union |
| GB/T 5629-2008 | 扩口式锥螺纹弯通管接头 | Flared couplings.Male elbow |
| GB/T 5630-2008 | 扩口式弯通管接头 | Flared couplings. Union elbow |
| GB/T 5631-2008 | 扩口式可调向端弯通管接头 | Flared couplings. Straight thread elbow |
| GB/T 5632-2008 | 扩口式组合弯通管接头 | Flared couplings.Swivel elbow |
| GB/T 5633-2008 | 扩口式可调向端三通管接头 | Flared couplings. Straight thread branch tee |
| GB/T 5634-2008 | 扩口式组合弯通二通管接头 | Flared couplings.Swivel run tee |
| GB/T 5635-2008 | 扩口式锥螺纹三通管接头 | Flared couplings.Male branch tee |
| GB/T 5637-2008 | 扩口式可调向端弯通三通管接头 | Flared couplings. Straight thread run tee |
| GB/T 5638-2008 | 扩口式组合三通管接头 | Flared couplings.Swivel branch tee |
| GB/T 5639-2008 | 扩口式三通管接头 | Flared couplings-Union tee |
| GB/T 5641-2008 | 扩口式四通管接头 | Flared couplings.Union cross |
| GB/T 5642-2008 | 扩口式焊接管接头 | Flared couplings. Weld male |
| GB/T 5643-2008 | 扩口式过板直通管接头 | Flared couplings-Bulkhead union |
| GB/T 5644-2008 | 扩口式过板弯通管接头 | Flared couplings. Bulkhead union elbow |
| GB/T 5645-2008 | 扩口式压力表管接头 | Flared couplings.Connector for pressure gauge |
| GB/T 5646-2008 | 扩口式管接头管套 | Flared couplings. Sleeve |
| GB/T 5647-2008 | 扩口式管接头用A型螺母 | Flared couplings. Style A nut |
| GB/T 5648-2008 | 扩口式管接头用B型螺母 | Flared couplings. Style B nut |
| GB/T 5649-2008 | 管接头用锁紧螺母和垫圈 | Flared couplings.Lock nut and lockup washer |
| GB/T 5650-2008 | 扩口式管管接头用空心螺栓 | Flared couplings. Inverted flare bolts |
| GB/T 5651-2008 | 扩口式管接头用密合垫 | Flared couplings. Seat insert |
| GB/T 5652-2008 | 扩口式管接头扩口端尺寸 | Flared couplings.Flared end |
| GB/T 5653-2008 | 扩口式管接头技术条件 | Flared couplings. Specification |
| GB/T 5742-1999 | 船用饮水舱注入接头 | Filling connection for drinking water tanks on ships |
| GB/T 5860-2003 | 液压快换接头 尺寸和要求 | Hydraulic fluid power—Quick-action couplings Dimensions and requirements |
| GB/T 5861-2003 | 液压快换接头 试验方法 | Hydraulic fluid power-Quick action couplings-Test methods |
| GB/T 5862-2008 | 农业拖拉机和机具.通用液压快换接头 | Agricultural tractors and machinery.General purpose quick-action hydraulic couplers |
| GB/T 5973-2006 | 钢丝绳用楔形接头 | Cuneiform connector for use with steel wire ropes |
| GB/T 6329-1996 | 胶粘剂对接接头拉伸强度的测定 | Adhesives--Determination of tensile strength of butt joints |
| GB/T 6417.1-2005 | 金属熔化焊接头缺欠分类及说明 | Classification and explanation of imperfections in fusion welded joints |
| GB/T 6417.2-2005 | 金属压力焊接头缺欠分类及说明 | Classification and explanation of imperfections in pressure welded joints |
| GB/T 6661-1986 | 插入式耳机的乳头状接头 | Nipples for insert earphones |
| GB/T 6946-2008 | 钢丝绳铝合金压制接头 | () |
| GB/T 7937-2008 | 液压气动管接头及其相关元件.公称压力系列 | Fluid power systems and components.Connectors and associated components.Nominal pressures |
| GB/T 7940.1-2008 | 气动.五气口方向控制阀.第1部分:不带电气接头的安装面 | Pneumatic fluid power.Five-port directional control valves.Part1:Mounting interface suifaces without electrical connector |
| GB/T 7940.2-2008 | 气动.五气口方向控制阀.第2部分:带可选电气接头的安装面 | Pneumatic fluid power.Five-port directional control valves.Part2:Mounting interface surfaces with optional electrical connector |
| GB/T 8259-2008 | 卡箍式柔性管接头.技术条件 | Specification for flexible joints of housing |
| GB/T 8260-2008 | 卡箍式柔性管接头.型式与尺寸 | Types and dimensions of flexible joints of housing |
| GB/T 8606-2003 | 液压快换接头螺纹连接尺寸及技术要求 | Thread connecting dimensions and specifications of hydraulic fluid power-Quick action couplings |
| GB/T 9065.1-1988 | 液压软管接头 连接尺寸 扩口式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 1--Flare type) |
| GB/T 9065.2-1988 | 液压软管接头 连接尺寸 卡套式 | Hydraulic fluid power--Hose connector--Connecting dimension (Part 2--Insert type) |
| GB/T 9065.3-1988 | 液压软管接头 连接尺寸 焊接式或快换式 | Hydraulic fluid power--Hose connector--Connecting dimension(Part 3:Welding or quick-action type) |
| GB/T 9326.4-2008 | 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件.第4部分: 接头 | Oil-filled,paper or polypropylene paper laminate insulated,metal-sheathed cables and accessories for alternating voltages up to and including 500 kV.Part 4:Joint |
| HD 623 S1-1996+A1-2001 | 额定电压 0.6/1.0 kV 配电电缆的接头、止动端和室外终端规范 | Specification for joints, stop ends and outdoor terminations for distribution cables of rated voltage 0,6/1,0 kV / Note: To be replaced by prEN 50393 (2003-07). |
| HG/T 2270-1992 | 内胎接头机 | () |
| HG/T 2289-2001 | 可曲挠橡胶接头 | () |
| HG/T 3196-2009 | 石墨外接头 | () |
| HG/T 3201-2009 | 石墨内接头 | () |
| HG/T 3652-1999 | 快装管接头 | () |
| JB/T 10708-2007 | 胶管接头扣压机 | () |
| JB/T 10740.2-2007 | 额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆 冷收缩式附件 第2部分：直通接头 | Cold shrinkable accessories for extruded insualtion power cables with rated voltages from 6kV (Um=7.2kV) up to 35kV(Um=40.5kV)-Part 2:Straight joints |
| JB/T 1308.4-1999 | 橡胶密封真空规管接头 | () |
| JB/T 1308.5-1999 | 发电机锡焊接头检测方法 | () |
| JB/T 1308.9-1999 | 照相机 快线接头及快线座 | () |
| JB/T 1754-2008 | 阀门零部件 接头组件 | () |
| JB/T 2636-1994(2006年确认) | 锅炉受压元件焊接接头金相和断口检验方法 | () |
| JB/T 3411.17-1999 | 中间接头 尺寸 | () |
| JB/T 3411.21-1999 | 可调中心接头 尺寸 | () |
| JB/T 3947-1999 | 电阻点焊电极接头 | () |
| JB/T 5121-1991 | 额定电压26/35kV 及以下电力电缆附件基本技术要求 电缆接头 | () |
| JB/T 5227.2-1991 | 气相色谱仪用管路附件 接头 | () |
| JB/T 5993-1992 | 管接头 检测方法 | () |
| JB/T 6144.1-2007 | 锥密封胶管总成 锥接头 | () |
| JB/T 6144.2-2007 | 锥密封胶管总成 55°非密封管螺纹锥接头 | () |
| JB/T 6144.3-2007 | 锥密封胶管总成 55o密封管螺纹锥接头 | () |
| JB/T 6144.4-2007 | 锥密封胶管总成 60°密封管螺纹锥接头 | () |
| JB/T 6144.5-2007 | 锥密封胶管总成 焊接锥接头 | () |
| JB/T 6381.1-2007 | 锥密封焊接式 直通管接头 | () |
| JB/T 6381.2-2007 | 锥密封焊接式 直通55°非密封管螺纹管接头 | () |
| JB/T 6381.3-2007 | 锥密封焊接式 直通55°密封管螺纹管接头 | () |
| JB/T 6381.4-2007 | 锥密封焊接式 直通60°密封管螺纹管接头 | () |
| JB/T 6382.1-2007 | 锥密封焊接式90o弯管接头 | () |
| JB/T 6382.2-2007 | 锥密封焊接式55o非密封管螺纹90o弯管接头 | () |
| JB/T 6382.3-2007 | 锥密封焊接式55o密封管螺纹90o弯管接头 | () |
| JB/T 6382.4-2007 | 锥密封焊接式60o密封管螺纹90o弯管接头 | () |
| JB/T 6383.1-2007 | 锥密封两端焊接式直通管接头 | () |
| JB/T 6383.2-2007 | 锥密封焊接式直角管接头 | () |
| JB/T 6383.3-2007 | 锥密封焊接式三通管接头 | () |
| JB/T 6384.1-2007 | 锥密封焊接式隔壁直角管接头 | () |
| JB/T 6384.2-2007 | 锥密封焊接式隔壁直通管接头 | () |
| JB/T 6385-2007 | 锥密封焊接式压力表管接头 | () |
| JB/T 6386-2007 | 锥密封焊接式管接头 技术条件 | () |
| JB/T 6464-2006 | 额定电压1kV(Um= 1.2kV)到35kV(Um = 40.5kV)挤包绝缘电力电缆绕包式直通接头 | Taped straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 35kV(Um=40.5kV) |
| JB/T 7056-2008 | 气动管接头 通用技术条件 | () |
| JB/T 7057-2008 | 调速式气动管接头 技术条件 | () |
| JB/T 7058-1993 | 快换式气动管接头 技术条件 | () |
| JB/T 7339-2007 | 挠性管接头 | () |
| JB/T 7830-2006 | 额定电压1kV（Um=1.2kV）到10kV（Um=12kV）挤包绝缘电力电缆热收缩式直通接头 | Heat-shrinkable straight joints for extruded insulation power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) |
| JB/T 7832-2006 | 额定电压1kV（Um=1.2kV）到10kV（Um=12kV）电力电缆树脂浇铸式直通接头 | Cast resin straight joints for power cables with rated voltages from 1kV(Um=1.2kV) up to 10kV(Um=12kV) |
| JB/T 7850-2007 | 手夹快换接头 | () |
| JB/T 7940.2-1995 | 接头式压注油杯 | () |
| JB/T 8105.2-1999 | 金属密封真空规管接头 | () |
| JB/T 8302-2000 | 农业拖拉机和机具液压输出快换接头 技术条件 | () |
| JB/T 8503.2-2006 | 额定电压6kV(Um = 7.2kV)到35kV(Um = 40.5kV)挤包绝缘电力电缆预制件装配式附件 第2部分：直通接头 | Premolded accessories (slip-on type) for extruded insulation power cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) Part 2:Straight |
| JB/T 8725-1998 | 旋转接头 | () |
| JB/T 9162.17-1999 | 联动夹持杆接头 尺寸 | () |
| JB/T 9162.18-1999 | 夹持杆接头 尺寸 | () |
| JB/T 9465-1999 | 水密接头 | () |
| JB/T 966-2005 | 用于流体传动和一般用途的金属管接头 O形圈平面密封接头 | () |
| JB/T 978-1977 | 焊接式铰接管接头 | () |
| JB/T 9959-1999 | 电阻点焊 内锥度1:10的电极接头 | () |
| JB/T 998-1977 | 焊接式铰接管接头体 | () |
| JB/T 999-1977 | 管接头用铰接螺栓 | () |
| JC 538-1994 | 石棉水泥落水管、排污管及其接头 | () |
| JC 980-2005 | 纤维水泥电缆管及其接头 | () |
| JC/T 1091-2008 | 预应力钢筒混凝土管接头用型钢 | () |
| JJG(石油) 1-1996 | 石油钻具接头螺纹工作量规 | () |
| JJG(石油) 51-2000 | 石油钻具接头螺纹、套管圆螺纹和油管螺纹校对量规 检定规程 | () |
| MT/T 153-1987 | 中心单链刮板输送机蛙形链接头 | () |
| MT/T 310-1992 | 高压水管楔式快速接头 | () |
| MT/T 318.1-1997 | 煤矿用输送带机械接头 技术条件 | () |
| MT/T 319－2006 | 煤矿输送带机械接头用带扣 | () |
| MT/T 986-2006 | 矿用U形销式快速接头及附件 | () |
| QB 1504-1992 | 实验室玻璃仪器互换锥形磨砂接头 | () |
| QB/T 2481-2000 | 旋转接头技术条件 | () |
| QC/T 201-1995(2005) | 汽车气制动用热塑管接头尺寸 | () |
| QC/T 228.3-1997(2005) | 摩托车和轻便摩托车操纵拉索 接头 | () |
| QC/T 29009-1991(2005) | 汽车用电线接头 技术条件 | () |
| QC/T 29010-1991(2005) | 汽车用低压电线接头型式、尺寸和技术要求 | () |
| QC/T 29011-1991(2005) | 汽车用点火线电线接头型式、尺寸和技术要求 | () |
| QC/T 29013-1991(2005) | 汽车用蓄电池电线接头型式、尺寸和技术要求 | () |
| QC/T 304-1999(2005) | 汽车转向拉杆接头总成台架试验方法 | () |
| QC/T 327-1999(2005) | 汽车用球头接头 | () |
| QC/T 399-1999(2005) | 卡套式锥螺纹直通接头体 | () |
| QC/T 400-1999(2005) | 卡套式锥螺纹直角三通接头体 | () |
| QC/T 401-1999(2005) | 卡套式锥螺纹直角接头体 | () |
| QC/T 402-1999(2005) | 卡套式锥螺纹三通接头体 | () |
| QC/T 403-1999(2005) | 扩口式锥螺纹直通管接头体 | () |
| QC/T 404-1999(2005) | 扩口式锥螺纹直角管接头体 | () |
| QC/T 405-1999(2005) | 扩口式锥螺纹三通管接头体 | () |
| QC/T 669-2000(2005) | 汽车空调(HFC-134a)用管接头和管件 | () |
| QC/T 701-2004 | 摩托车和轻便摩托车后减震器安装接头尺寸 | Mounting of rear shock absorbers for motorcycles and mopeds |
| QC/T 764-2006 | 汽车液压制动系 金属管、内外螺纹管接头和软管端部接头 | () |
| SB/T 10355-2002 | 制冷系统和热泵—软管件、隔振器和膨胀接头—要求、设计与安装 | () |
| SY/T 0516-2008 | 绝缘接头与绝缘法兰技术规范 | () |
| SY/T 0525.2-1993 | 石油储罐回转接头 | () |
| SY/T 5067-1991(2005) | 安全接头 | () |
| SY/T 5067-2008 | 安全接头 | () |
| SY/T 5200-2002 | 钻柱转换接头 | () |
| SY/T 5290-2000 | 石油钻杆接头 | () |
| SY/T 5988-1994 | 油管转换接头 | () |
| SY/T 6669-2006 | 端盖、联结件和旋转接头规范 | Specification on end closures,connectors and swivels |
| SY/T 6715-2008 | 钢管管接头焊接 | () |
| 编号 | 中文名称 | 英文名称 |